All MIBs › EDGELINK-MIB › elCMBerThreshold

elCMBerThreshold

OID (symbolic): EDGELINK-MIB::elCMBerThreshold

OID (numeric): 1.3.6.1.4.1.564.101.1.2.11

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Set the BER Threshold value for the system to 10-6, 10-7, 10-8 or 10-9. BerThershold can't changed when the ServiceMode is IN-Service.

What is elCMBerThreshold?

This sets the bit-error-rate threshold used to declare a DS3 signal degraded, choosing among 10^-6 through 10^-9, and can't be changed while the system is in-service. A technician tightens this threshold (e.g. to 10^-9) when the circuit needs stricter quality monitoring.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.564.101.1.2.11
snmpwalk -v2c -c public <target> EDGELINK-MIB::elCMBerThreshold

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.564.101.1.2.11.1
snmpget -v2c -c public <target> EDGELINK-MIB::elCMBerThreshold.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.564.101.1.2.11.1 i <value>

Start monitoring EdgeLink edge access multiplexer (DS1 channelized module) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EDGELINK-MIB::elCMBerThreshold OID value, configure state conditions and alerts, and monitor any EdgeLink edge access multiplexer (DS1 channelized module) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.564	telco	EDGELINK-MIB
1.3.6.1.4.1.564.101	edgeLink	EDGELINK-MIB
1.3.6.1.4.1.564.101.1	elM13v1	EDGELINK-MIB
1.3.6.1.4.1.564.101.1.2	elCM	EDGELINK-MIB
1.3.6.1.4.1.564.101.1.2.11	elCMBerThreshold	EDGELINK-MIB

EDGELINK-MIB :: elCMBerThreshold

elCMBerThreshold

Module

This MIB depends on