All MIBs › EBN-MIB › ebnSearchCpName
ebnSearchCpName
Module: EBN-MIB
OID (symbolic): EBN-MIB::ebnSearchCpName
OID (numeric): 1.3.6.1.2.1.34.7.1.5.2.1.3
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-only
Description: This object specifies the CP(s) to which a search should be forwarded. It either follows the SnaNAUWildcardName textual convention or takes one of the following special formats:
'*' indicates that all native EBNs and all adjacent non- native EBNs and NNs may be added to the routing list dynamically, '*SELF' indicates that the EBN should search itself and its native subnetwork at this time during the cross-subnet search, '*EBNS' indicates all native EBNs.
Because the characters allowed in a CP name come from a restricted character set, and because the three formats listed here use no special characters, this object is not subject to internationalization.
What is ebnSearchCpName?
This read-only string identifies a control point, or a special wildcard group of control points, to which the Extended Border Node should forward a LOCATE search for a given LU: it may be a specific CP name, '*' for dynamically addable native and adjacent EBNs/NNs, '*SELF' to search the EBN's own native subnetwork, or '*EBNS' for all native EBNs. Admins configure and review these entries to control the exact sequence of control points a cross-subnetwork search visits when hunting for a given LU. For example, a search list entry of '*SELF' followed by a specific remote EBN's CP name tells this border node to check its own subnetwork first before forwarding the search onward to that specific peer.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.34.7.1.5.2.1.3 snmpwalk -v2c -c public <target> EBN-MIB::ebnSearchCpName
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.34.7.1.5.2.1.3.1 snmpget -v2c -c public <target> EBN-MIB::ebnSearchCpName.1
Start monitoring SNA/APPN border node router or gateway (vendor-neutral IETF/IBM standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EBN-MIB::ebnSearchCpName OID value, configure state conditions and alerts, and monitor any SNA/APPN border node router or gateway (vendor-neutral IETF/IBM standard) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.34 | snanauMIB | SNA-NAU-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.34.7 | ebnMIB | EBN-MIB |
| 1.3.6.1.2.1.34.7.1 | ebnObjects | EBN-MIB |
| 1.3.6.1.2.1.34.7.1.5 | ebnSubnetRoutingList | EBN-MIB |
| 1.3.6.1.2.1.34.7.1.5.2 | ebnSearchTable | EBN-MIB |
| 1.3.6.1.2.1.34.7.1.5.2.1 | ebnSearchEntry | EBN-MIB |
| 1.3.6.1.2.1.34.7.1.5.2.1.3 | ebnSearchCpName | EBN-MIB |