All MIBs › EATON-PDU-MIB › pduNeutralCurrent
pduNeutralCurrent
Module: EATON-PDU-MIB
OID (symbolic): EATON-PDU-MIB::pduNeutralCurrent
OID (numeric): 1.3.6.1.4.1.534.6.6.4.1.1.3.5
Node type: OBJECT-TYPE
Type: NonNegativeInteger
Access: read-only
Description: The present current in the PDU's output neutral phase. Ideally, this value stays at 0.
What is pduNeutralCurrent?
Reports the current on the PDU's output neutral conductor in tenths of an amp, a value that should stay near zero on a balanced three-phase load — a climbing neutral current usually means the phases are unevenly loaded.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.534.6.6.4.1.1.3.5 snmpwalk -v2c -c public <target> EATON-PDU-MIB::pduNeutralCurrent
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.534.6.6.4.1.1.3.5.1 snmpget -v2c -c public <target> EATON-PDU-MIB::pduNeutralCurrent.1
Start monitoring Eaton PDU (power distribution unit) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EATON-PDU-MIB::pduNeutralCurrent OID value, configure state conditions and alerts, and monitor any Eaton PDU (power distribution unit) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.534 | eaton | EATON-OIDS |
| 1.3.6.1.4.1.534.6 | products | EATON-OIDS |
| 1.3.6.1.4.1.534.6.6 | pduAgent | EATON-OIDS |
| 1.3.6.1.4.1.534.6.6.4 | eatonPdu | EATON-OIDS |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.534.6.6.4.1 | eatonPduMIBObjects | EATON-PDU-MIB |
| 1.3.6.1.4.1.534.6.6.4.1.1 | mainPdu | EATON-PDU-MIB |
| 1.3.6.1.4.1.534.6.6.4.1.1.3 | pduOutput | EATON-PDU-MIB |
| 1.3.6.1.4.1.534.6.6.4.1.1.3.5 | pduNeutralCurrent | EATON-PDU-MIB |