All MIBs › EATON-EPDU-MIB › unitControlOnCmd
unitControlOnCmd
Module: EATON-EPDU-MIB
OID (symbolic): EATON-EPDU-MIB::unitControlOnCmd
OID (numeric): 1.3.6.1.4.1.534.6.6.7.1.3.1.3
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: Unit-level outlet control command.
Once the command is issued, outlets will turn On according to their outletControlSequenceDelay value. 0-n : Time in seconds until the outlet Sequence On command is issued -1 : Cancel a pending unit-level On command
When read, returns -1 if no command is pending, or the current downcount in seconds of a pending command.
Certain ePDUs (mainly those with part numbers beginning with IPV or IPC) do not support delayed control commands. These will respond with an error if a command value of > 0 is written to this object.
What is unitControlOnCmd?
Read-write integer (-1 to 99999) that issues a unit-level command to turn all outlets on following each outlet's configured sequence delay; writing 0-n sets a countdown in seconds, -1 cancels a pending command, and reading it returns -1 (idle) or the current countdown. As with unitControlOffCmd, IPV/IPC-series PDUs reject delayed (>0) values.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.534.6.6.7.1.3.1.3 snmpwalk -v2c -c public <target> EATON-EPDU-MIB::unitControlOnCmd
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.534.6.6.7.1.3.1.3.1 snmpget -v2c -c public <target> EATON-EPDU-MIB::unitControlOnCmd.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.534.6.6.7.1.3.1.3.1 i <value>
Start monitoring Eaton ePDU rack power distribution unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EATON-EPDU-MIB::unitControlOnCmd OID value, configure state conditions and alerts, and monitor any Eaton ePDU rack power distribution unit from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.534 | eaton | EATON-OIDS |
| 1.3.6.1.4.1.534.6 | products | EATON-OIDS |
| 1.3.6.1.4.1.534.6.6 | pduAgent | EATON-OIDS |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.534.6.6.7 | eatonEpdu | EATON-EPDU-MIB |
| 1.3.6.1.4.1.534.6.6.7.1 | units | EATON-EPDU-MIB |
| 1.3.6.1.4.1.534.6.6.7.1.3 | unitControlTable | EATON-EPDU-MIB |
| 1.3.6.1.4.1.534.6.6.7.1.3.1 | unitControlEntry | EATON-EPDU-MIB |
| 1.3.6.1.4.1.534.6.6.7.1.3.1.3 | unitControlOnCmd | EATON-EPDU-MIB |