EATON-EPDU-MIB :: unitControlOffCmd

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › EATON-EPDU-MIB › unitControlOffCmd

unitControlOffCmd

Module: EATON-EPDU-MIB

OID (symbolic): EATON-EPDU-MIB::unitControlOffCmd

OID (numeric): 1.3.6.1.4.1.534.6.6.7.1.3.1.2

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: Unit-level outlet control command.

Once the command is issued, outlets will turn Off. 0-n : Time in seconds until the outlet Sequence Off command is issued -1 : Cancel a pending unit-level Off command

When read, returns -1 if no command is pending, or the current downcount in seconds of a pending command.

Certain ePDUs (mainly those with part numbers beginning with IPV or IPC) do not support delayed control commands. These will respond with an error if a command value of > 0 is written to this object.

What is unitControlOffCmd?

Read-write integer (-1 to 99999) that issues a unit-level command to turn all outlets off; writing 0-n sets a countdown in seconds before the off sequence fires, and -1 cancels a pending command, while reading it returns -1 (idle) or the current countdown. Some models (IPV/IPC part numbers) reject any value greater than 0 since they don't support delayed shutoff.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.534.6.6.7.1.3.1.2
snmpwalk -v2c -c public <target> EATON-EPDU-MIB::unitControlOffCmd

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.534.6.6.7.1.3.1.2.1
snmpget -v2c -c public <target> EATON-EPDU-MIB::unitControlOffCmd.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.534.6.6.7.1.3.1.2.1 i <value>

Start monitoring Eaton ePDU rack power distribution unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EATON-EPDU-MIB::unitControlOffCmd OID value, configure state conditions and alerts, and monitor any Eaton ePDU rack power distribution unit from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.534eatonEATON-OIDS
1.3.6.1.4.1.534.6productsEATON-OIDS
1.3.6.1.4.1.534.6.6pduAgentEATON-OIDS
Numeric OIDNameModule
1.3.6.1.4.1.534.6.6.7eatonEpduEATON-EPDU-MIB
1.3.6.1.4.1.534.6.6.7.1unitsEATON-EPDU-MIB
1.3.6.1.4.1.534.6.6.7.1.3unitControlTableEATON-EPDU-MIB
1.3.6.1.4.1.534.6.6.7.1.3.1unitControlEntryEATON-EPDU-MIB
1.3.6.1.4.1.534.6.6.7.1.3.1.2unitControlOffCmdEATON-EPDU-MIB