All MIBs › EATON-EPDU-MIB › groupControlRebootCmd
groupControlRebootCmd
Module: EATON-EPDU-MIB
OID (symbolic): EATON-EPDU-MIB::groupControlRebootCmd
OID (numeric): 1.3.6.1.4.1.534.6.6.7.5.6.1.5
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: Group-level outlet control command.
For outlets that are On prior to the Reboot command, they will switch Off immediately when the command is issued, remain Off for outletControlRebootOffTime seconds, and then turn back On. For outlets that are Off prior to the Reboot command, they will turn On after a delay of outletControlRebootOffTime seconds from when the command is issued. 0-n : Time in seconds until the Reboot command is issued -1 : Cancel a pending group-level Reboot command
When read, returns -1 if no command is pending, or the current downcount in seconds of a pending command.
Certain ePDUs (mainly those with part numbers beginning with IPV or IPC) do not support delayed control commands. These will respond with an error if a command value of > 0 is written to this object.
What is groupControlRebootCmd?
Read-write integer (-1 to 0) issuing a group-level reboot: outlets that were on switch off immediately, stay off for outletControlRebootOffTime seconds, then turn back on, while outlets that were already off simply turn on after that same delay; -1 cancels a pending reboot. Admins use this to power-cycle a whole group of outlets (e.g. a breaker's worth of equipment) with one command instead of toggling off then on manually.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.534.6.6.7.5.6.1.5 snmpwalk -v2c -c public <target> EATON-EPDU-MIB::groupControlRebootCmd
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.534.6.6.7.5.6.1.5.1 snmpget -v2c -c public <target> EATON-EPDU-MIB::groupControlRebootCmd.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.534.6.6.7.5.6.1.5.1 i <value>
Start monitoring Eaton ePDU rack power distribution unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EATON-EPDU-MIB::groupControlRebootCmd OID value, configure state conditions and alerts, and monitor any Eaton ePDU rack power distribution unit from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.534 | eaton | EATON-OIDS |
| 1.3.6.1.4.1.534.6 | products | EATON-OIDS |
| 1.3.6.1.4.1.534.6.6 | pduAgent | EATON-OIDS |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.534.6.6.7 | eatonEpdu | EATON-EPDU-MIB |
| 1.3.6.1.4.1.534.6.6.7.5 | groups | EATON-EPDU-MIB |
| 1.3.6.1.4.1.534.6.6.7.5.6 | groupControlTable | EATON-EPDU-MIB |
| 1.3.6.1.4.1.534.6.6.7.5.6.1 | groupControlEntry | EATON-EPDU-MIB |
| 1.3.6.1.4.1.534.6.6.7.5.6.1.5 | groupControlRebootCmd | EATON-EPDU-MIB |