EATON-EPDU-MIB :: groupControl0nCmd

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › EATON-EPDU-MIB › groupControl0nCmd

groupControl0nCmd

Module: EATON-EPDU-MIB

OID (symbolic): EATON-EPDU-MIB::groupControl0nCmd

OID (numeric): 1.3.6.1.4.1.534.6.6.7.5.6.1.4

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: Group-level outlet control command.

Once the command is issued, the outlets in the group will turn On immediately. 0-n : Time in seconds until the group command is issued -1 : Cancel a pending group-level On command

When read, returns -1 if no command is pending, or the current downcount in seconds of a pending command.

Certain ePDUs (mainly those with part numbers beginning with IPV or IPC) do not support delayed control commands. These will respond with an error if a command value of > 0 is written to this object.

What is groupControl0nCmd?

Read-write integer (-1 to 99999), whose name is a literal digit-'0' typo for "groupControlOnCmd" in the source MIB, issuing a group-level command to turn all outlets in the group on; 0-n sets a countdown in seconds, -1 cancels a pending command, and reading returns -1 (idle) or the remaining countdown. IPV/IPC-series PDUs reject delayed (>0) values, same as the other control commands.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.534.6.6.7.5.6.1.4
snmpwalk -v2c -c public <target> EATON-EPDU-MIB::groupControl0nCmd

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.534.6.6.7.5.6.1.4.1
snmpget -v2c -c public <target> EATON-EPDU-MIB::groupControl0nCmd.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.534.6.6.7.5.6.1.4.1 i <value>

Start monitoring Eaton ePDU rack power distribution unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EATON-EPDU-MIB::groupControl0nCmd OID value, configure state conditions and alerts, and monitor any Eaton ePDU rack power distribution unit from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.534eatonEATON-OIDS
1.3.6.1.4.1.534.6productsEATON-OIDS
1.3.6.1.4.1.534.6.6pduAgentEATON-OIDS
Numeric OIDNameModule
1.3.6.1.4.1.534.6.6.7eatonEpduEATON-EPDU-MIB
1.3.6.1.4.1.534.6.6.7.5groupsEATON-EPDU-MIB
1.3.6.1.4.1.534.6.6.7.5.6groupControlTableEATON-EPDU-MIB
1.3.6.1.4.1.534.6.6.7.5.6.1groupControlEntryEATON-EPDU-MIB
1.3.6.1.4.1.534.6.6.7.5.6.1.4groupControl0nCmdEATON-EPDU-MIB