E5-111-IESCOMMON-MIB :: iesSlotModuleAlarmStatus

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › E5-111-IESCOMMON-MIB › iesSlotModuleAlarmStatus

iesSlotModuleAlarmStatus

Module: E5-111-IESCOMMON-MIB

OID (symbolic): E5-111-IESCOMMON-MIB::iesSlotModuleAlarmStatus

OID (numeric): 1.3.6.1.4.1.6321.1.2.3.2.98.1.3.1.8

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This variable indicates the alarm status of the module. It is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The moduleNoDefect should be set if and only if no other flag is set.

The various bit positions are: 1 moduleNoDefect 2 moduleOverHeat 3 moduleFanRpmLow 4 moduleVoltageLow 5 moduleThermalSensorFailure 6 modulePullOut 7 powerDC48VAFailure 8 powerDC48VBFailure 9 extAlarmInputTrigger 10 moduleDown 11 mscSwitchOverOK 12 networkTopologyChange

What is iesSlotModuleAlarmStatus?

A bitmap alarm status for the card, where each bit flags a specific condition (bit 1 = no defect, bit 2 = overheat, bit 3 = fan RPM low, bit 4 = voltage low, bit 5 = thermal sensor failure, bit 6 = card pulled out, plus power-supply and topology-change flags). Multiple bits can be set at once, so an admin decodes the sum to see every active alarm on that card in a single poll.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6321.1.2.3.2.98.1.3.1.8
snmpwalk -v2c -c public <target> E5-111-IESCOMMON-MIB::iesSlotModuleAlarmStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6321.1.2.3.2.98.1.3.1.8.1
snmpget -v2c -c public <target> E5-111-IESCOMMON-MIB::iesSlotModuleAlarmStatus.1

Start monitoring Calix E5-111 integrated Ethernet service access platform (shared definitions) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the E5-111-IESCOMMON-MIB::iesSlotModuleAlarmStatus OID value, configure state conditions and alerts, and monitor any Calix E5-111 integrated Ethernet service access platform (shared definitions) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6321calixNetworksCALIX-SMI
1.3.6.1.4.1.6321.1calixRegistrationsCALIX-SMI
1.3.6.1.4.1.6321.1.2calixProductsCALIX-SMI
1.3.6.1.4.1.6321.1.2.3e5x100CALIX-PRODUCT-MIB
1.3.6.1.4.1.6321.1.2.3.2e5x111E5-111-MIB
1.3.6.1.4.1.6321.1.2.3.2.98iesSeriesCommonE5-111-MIB
Numeric OIDNameModule
1.3.6.1.4.1.6321.1.2.3.2.98.1iesChassisE5-111-IESCOMMON-MIB
1.3.6.1.4.1.6321.1.2.3.2.98.1.3iesSlotTableE5-111-IESCOMMON-MIB
1.3.6.1.4.1.6321.1.2.3.2.98.1.3.1iesSlotEntryE5-111-IESCOMMON-MIB
1.3.6.1.4.1.6321.1.2.3.2.98.1.3.1.8iesSlotModuleAlarmStatusE5-111-IESCOMMON-MIB