All MIBs › E5-111-IESCOMMON-MIB › iesMaintenanceDSLConfOps
iesMaintenanceDSLConfOps
Module: E5-111-IESCOMMON-MIB
OID (symbolic): E5-111-IESCOMMON-MIB::iesMaintenanceDSLConfOps
OID (numeric): 1.3.6.1.4.1.6321.1.2.3.2.98.3.2.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The managed object is for xDSL line configuration. When the EMS wants to issue the desired operation, the EMS shall send SNMP-SET message to set the corresponding bit value to be 1. The various bit positions are: BIT 1: enable port BIT 2: disable port BIT 3: set DSL mode BIT 4: set profile BIT 5: enable mac filter BIT 6: disable mac filter BIT 7: set packet filter BIT 8: enable dot1x BIT 9: disable dot1x BIT 10: set dot1x control BIT 11: enable dot1x re-authentication BIT 12: disable dot1x re-authentication BIT 13: set dot1x re-authentication period BIT 14: enable mac count filter BIT 15: disable mac count filter BIT 16: set mac count filter BIT 17: set alarm profile BIT 18: set Annex L (Only in AnnexA) BIT 19: set power management BIT 20: set rate adaptation mode BIT 21: set IGMP filter (Not support after E5-111 v3.0) BIT 22: enable Annex M BIT 23: disable Annex M
What is iesMaintenanceDSLConfOps?
A bitmap used for batch-provisioning DSL lines: bit 1 enables the target port, bit 2 disables it, bit 3 applies a DSL mode, bit 4 applies a profile, and further bits enable/disable MAC filtering, packet filtering, 802.1x and its re-authentication, MAC-count filtering, an alarm profile, Annex L, power management, rate adaptation, IGMP filtering (pre-v3.0 only), and Annex M. It lets an EMS push one configuration action at a time to the port(s) named in iesMaintenanceDSLConfTarget.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6321.1.2.3.2.98.3.2.3 snmpwalk -v2c -c public <target> E5-111-IESCOMMON-MIB::iesMaintenanceDSLConfOps
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6321.1.2.3.2.98.3.2.3.1 snmpget -v2c -c public <target> E5-111-IESCOMMON-MIB::iesMaintenanceDSLConfOps.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.6321.1.2.3.2.98.3.2.3.1 i <value>
Start monitoring Calix E5-111 integrated Ethernet service access platform (shared definitions) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the E5-111-IESCOMMON-MIB::iesMaintenanceDSLConfOps OID value, configure state conditions and alerts, and monitor any Calix E5-111 integrated Ethernet service access platform (shared definitions) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6321 | calixNetworks | CALIX-SMI |
| 1.3.6.1.4.1.6321.1 | calixRegistrations | CALIX-SMI |
| 1.3.6.1.4.1.6321.1.2 | calixProducts | CALIX-SMI |
| 1.3.6.1.4.1.6321.1.2.3 | e5x100 | CALIX-PRODUCT-MIB |
| 1.3.6.1.4.1.6321.1.2.3.2 | e5x111 | E5-111-MIB |
| 1.3.6.1.4.1.6321.1.2.3.2.98 | iesSeriesCommon | E5-111-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6321.1.2.3.2.98.3 | iesSysMgnt | E5-111-IESCOMMON-MIB |
| 1.3.6.1.4.1.6321.1.2.3.2.98.3.2 | iesSysMaintenance | E5-111-IESCOMMON-MIB |
| 1.3.6.1.4.1.6321.1.2.3.2.98.3.2.3 | iesMaintenanceDSLConfOps | E5-111-IESCOMMON-MIB |