DeltaUPS-MIB :: dupsAutoReboot

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DeltaUPS-MIB › dupsAutoReboot

dupsAutoReboot

Module: DeltaUPS-MIB

OID (symbolic): DeltaUPS-MIB::dupsAutoReboot

OID (numeric): 1.3.6.1.4.1.2254.2.4.2.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: In backup mode, the UPS may shutdown normally by SDA command, dry-contact remote shutdown signal or low battery shutdown. This command is used to determine the unit should restart or not next time when the power restores

What is dupsAutoReboot?

Read-write on(1)/off(2) setting controlling whether the UPS restarts automatically once utility power returns after a battery-triggered shutdown, letting an admin decide whether equipment should come back up unattended.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2254.2.4.2.2
snmpwalk -v2c -c public <target> DeltaUPS-MIB::dupsAutoReboot

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2254.2.4.2.2.1
snmpget -v2c -c public <target> DeltaUPS-MIB::dupsAutoReboot.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2254.2.4.2.2.1 i <value>

Start monitoring Delta UPS (uninterruptible power supply) system with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DeltaUPS-MIB::dupsAutoReboot OID value, configure state conditions and alerts, and monitor any Delta UPS (uninterruptible power supply) system from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2254deltaDeltaUPS-MIB
1.3.6.1.4.1.2254.2upsDeltaUPS-MIB
1.3.6.1.4.1.2254.2.4upsv4DeltaUPS-MIB
1.3.6.1.4.1.2254.2.4.2dupsControlDeltaUPS-MIB
1.3.6.1.4.1.2254.2.4.2.2dupsAutoRebootDeltaUPS-MIB