All MIBs › DellrPDU-MIB › rPDUPhaseCfgOverloadRestriction
rPDUPhaseCfgOverloadRestriction
Module: DellrPDU-MIB
OID (symbolic): DellrPDU-MIB::rPDUPhaseCfgOverloadRestriction
OID (numeric): 1.3.6.1.4.1.674.10903.200.2.200.120.3.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This OID controls the behavior of a Switched Rack PDU phase when an overload condition is possible and additional outlets are requested to be turned on. Setting this OID to alwaysAllowTurnON (1) will always allow the outlets on the corresponding phase to turn on. Setting this OID to restrictOnNearOverload (2) will not allow outlets on the corresponding phase to turn on if the rPDULoadConfigNearOverloadThreshold OID is exceeded. Setting this OID to restrictOnOverload (3) will not allow outlets on the corresponding phase to turn on if the rPDULoadConfigOverloadThreshold OID is exceeded.
What is rPDUPhaseCfgOverloadRestriction?
Controls whether the PDU allows more outlets on this phase to turn on while near or at an overload condition; setting restrictOnOverload(3), for example, blocks new outlets from turning on once the configured overload current threshold is exceeded, protecting the circuit from tripping.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.674.10903.200.2.200.120.3.1.3 snmpwalk -v2c -c public <target> DellrPDU-MIB::rPDUPhaseCfgOverloadRestriction
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.674.10903.200.2.200.120.3.1.3.1 snmpget -v2c -c public <target> DellrPDU-MIB::rPDUPhaseCfgOverloadRestriction.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.674.10903.200.2.200.120.3.1.3.1 i <value>
Start monitoring Dell rPDU (rack Power Distribution Unit) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DellrPDU-MIB::rPDUPhaseCfgOverloadRestriction OID value, configure state conditions and alerts, and monitor any Dell rPDU (rack Power Distribution Unit) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.674 | dell | ArrayManager-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.674.10903 | pdu | DellrPDU-MIB |
| 1.3.6.1.4.1.674.10903.200 | pdusub | DellrPDU-MIB |
| 1.3.6.1.4.1.674.10903.200.2 | hardware | DellrPDU-MIB |
| 1.3.6.1.4.1.674.10903.200.2.200 | rPDU | DellrPDU-MIB |
| 1.3.6.1.4.1.674.10903.200.2.200.120 | rPDUPhase | DellrPDU-MIB |
| 1.3.6.1.4.1.674.10903.200.2.200.120.3 | rPDUPhaseConfigTable | DellrPDU-MIB |
| 1.3.6.1.4.1.674.10903.200.2.200.120.3.1 | rPDUPhaseConfigEntry | DellrPDU-MIB |
| 1.3.6.1.4.1.674.10903.200.2.200.120.3.1.3 | rPDUPhaseCfgOverloadRestriction | DellrPDU-MIB |