All MIBs › DVB-MGSIGNALCHARACTERISTICS-MIB › structureTrapControlRateStatus
structureTrapControlRateStatus
Module: DVB-MGSIGNALCHARACTERISTICS-MIB
OID (symbolic): DVB-MGSIGNALCHARACTERISTICS-MIB::structureTrapControlRateStatus
OID (numeric): 1.3.6.1.4.1.2696.3.3.1.1.1.1.1.4
Node type: OBJECT-TYPE
Type: RateStatus
Access: read-write
Description: This object is used for rate control of traps, preventing overload of the management network by transmission of an excessive number of traps. The value 'disabled' means that traps are never sent. The value 'enabled' means that a trap will be sent when triggered.
When a trap is sent, the agent changes the value of this object to 'enabledThrottled'. In this state the agent will not send any more traps. The agent automatically changes the value back to 'enabled' when the time specified by trapControlPeriod expires. A management application may set the value to 'enabled' at any time, but must never set the value to 'enabledThrottled'.
What is structureTrapControlRateStatus?
Rate-limits how often tsStructureChangeTrap is sent for this Transport Stream input: disabled suppresses traps entirely, enabled allows one to fire, and the agent then flips this to enabledThrottled until structureTrapControlPeriod elapses. An admin re-enabling notifications after a burst of structural changes would set this back to enabled.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2696.3.3.1.1.1.1.1.4 snmpwalk -v2c -c public <target> DVB-MGSIGNALCHARACTERISTICS-MIB::structureTrapControlRateStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2696.3.3.1.1.1.1.1.4.1 snmpget -v2c -c public <target> DVB-MGSIGNALCHARACTERISTICS-MIB::structureTrapControlRateStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2696.3.3.1.1.1.1.1.4.1 s <value>
Start monitoring DVB broadcast measurement probe/headend equipment (vendor-neutral ETSI TR 101 290 standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DVB-MGSIGNALCHARACTERISTICS-MIB::structureTrapControlRateStatus OID value, configure state conditions and alerts, and monitor any DVB broadcast measurement probe/headend equipment (vendor-neutral ETSI TR 101 290 standard) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2696 | dvb | DVB-MGSIGNALCHARACTERISTICS-MIB |
| 1.3.6.1.4.1.2696.3 | mg | DVB-MGSIGNALCHARACTERISTICS-MIB |
| 1.3.6.1.4.1.2696.3.3 | mgSignalCharacteristics | DVB-MGSIGNALCHARACTERISTICS-MIB |
| 1.3.6.1.4.1.2696.3.3.1 | mgSignalCharacteristicsObjects | DVB-MGSIGNALCHARACTERISTICS-MIB |
| 1.3.6.1.4.1.2696.3.3.1.1 | mgTSStructure | DVB-MGSIGNALCHARACTERISTICS-MIB |
| 1.3.6.1.4.1.2696.3.3.1.1.1 | mgTSStructureTrap | DVB-MGSIGNALCHARACTERISTICS-MIB |
| 1.3.6.1.4.1.2696.3.3.1.1.1.1 | structureTrapControlTable | DVB-MGSIGNALCHARACTERISTICS-MIB |
| 1.3.6.1.4.1.2696.3.3.1.1.1.1.1 | structureTrapControlEntry | DVB-MGSIGNALCHARACTERISTICS-MIB |
| 1.3.6.1.4.1.2696.3.3.1.1.1.1.1.4 | structureTrapControlRateStatus | DVB-MGSIGNALCHARACTERISTICS-MIB |