All MIBs › DVB-MGSIGNALCHARACTERISTICS-MIB › rfCharacteristicsTrapControlRateStatus
rfCharacteristicsTrapControlRateStatus
Module: DVB-MGSIGNALCHARACTERISTICS-MIB
OID (symbolic): DVB-MGSIGNALCHARACTERISTICS-MIB::rfCharacteristicsTrapControlRateStatus
OID (numeric): 1.3.6.1.4.1.2696.3.3.1.2.1.1.1.4
Node type: OBJECT-TYPE
Type: RateStatus
Access: read-write
Description: This object is used for rate control of traps, preventing overload of the management network by transmission of an excessive number of traps. The value 'disabled' means that traps are never sent. The value 'enabled' means that a trap will be sent when triggered.
When a trap is sent, the agent changes the value of this object to 'enabledThrottled'. In this state the agent will not send any more traps. The agent automatically changes the value back to 'enabled' when the time specified by trapControlPeriod expires. A management application may set the value to 'enabled' at any time, but must never set the value to 'enabledThrottled'.
What is rfCharacteristicsTrapControlRateStatus?
Rate-limits how often rfCharacteristicsChangeTrap fires for this input: disabled suppresses it entirely, enabled allows the next trigger through, and the agent then sets this to enabledThrottled until rfCharacteristicsTrapControlPeriod elapses.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2696.3.3.1.2.1.1.1.4 snmpwalk -v2c -c public <target> DVB-MGSIGNALCHARACTERISTICS-MIB::rfCharacteristicsTrapControlRateStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2696.3.3.1.2.1.1.1.4.1 snmpget -v2c -c public <target> DVB-MGSIGNALCHARACTERISTICS-MIB::rfCharacteristicsTrapControlRateStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2696.3.3.1.2.1.1.1.4.1 s <value>
Start monitoring DVB broadcast measurement probe/headend equipment (vendor-neutral ETSI TR 101 290 standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DVB-MGSIGNALCHARACTERISTICS-MIB::rfCharacteristicsTrapControlRateStatus OID value, configure state conditions and alerts, and monitor any DVB broadcast measurement probe/headend equipment (vendor-neutral ETSI TR 101 290 standard) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2696 | dvb | DVB-MGSIGNALCHARACTERISTICS-MIB |
| 1.3.6.1.4.1.2696.3 | mg | DVB-MGSIGNALCHARACTERISTICS-MIB |
| 1.3.6.1.4.1.2696.3.3 | mgSignalCharacteristics | DVB-MGSIGNALCHARACTERISTICS-MIB |
| 1.3.6.1.4.1.2696.3.3.1 | mgSignalCharacteristicsObjects | DVB-MGSIGNALCHARACTERISTICS-MIB |
| 1.3.6.1.4.1.2696.3.3.1.2 | mgRFCharacteristics | DVB-MGSIGNALCHARACTERISTICS-MIB |
| 1.3.6.1.4.1.2696.3.3.1.2.1 | mgRFCharacteristicsTrap | DVB-MGSIGNALCHARACTERISTICS-MIB |
| 1.3.6.1.4.1.2696.3.3.1.2.1.1 | rfCharacteristicsTrapControlTable | DVB-MGSIGNALCHARACTERISTICS-MIB |
| 1.3.6.1.4.1.2696.3.3.1.2.1.1.1 | rfCharacteristicsTrapControlEntry | DVB-MGSIGNALCHARACTERISTICS-MIB |
| 1.3.6.1.4.1.2696.3.3.1.2.1.1.1.4 | rfCharacteristicsTrapControlRateStatus | DVB-MGSIGNALCHARACTERISTICS-MIB |