All MIBs › DVB-CABLE-INA-IF-MIB › dvbInaIfReprovSrcNiuCommand
dvbInaIfReprovSrcNiuCommand
Module: DVB-CABLE-INA-IF-MIB
OID (symbolic): DVB-CABLE-INA-IF-MIB::dvbInaIfReprovSrcNiuCommand
OID (numeric): 1.3.6.1.2.1.10.146.1.7.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-create
Description: Controls the reprovisioning on INA 1. When set to reprovStart the actual reporvisioning on INA 1 is initiated with a Reprovisioning Message to the NIU. Everything must be prepared for the reprovisioning when this is done. When read the response will always be reprovIdle.
What is dvbInaIfReprovSrcNiuCommand?
Setting this to reprovStart triggers INA 1 to actually send a Reprovisioning Message to the NIU, moving it toward the destination INA; everything (new channel/frequency settings) must already be staged before this is set. Reads always return reprovIdle, since this is a one-shot trigger rather than a persistent state.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.146 | dvbInaIf | DVB-CABLE-INA-IF-MIB |
| 1.3.6.1.2.1.10.146.1 | dvbInaIfMIBObjects | DVB-CABLE-INA-IF-MIB |
| 1.3.6.1.2.1.10.146.1.7 | dvbInaIfReprov | DVB-CABLE-INA-IF-MIB |
| 1.3.6.1.2.1.10.146.1.7.1 | dvbInaIfReprovSrcNiuTable | DVB-CABLE-INA-IF-MIB |
| 1.3.6.1.2.1.10.146.1.7.1.1 | dvbInaIfReprovSrcNiuEntry | DVB-CABLE-INA-IF-MIB |
| 1.3.6.1.2.1.10.146.1.7.1.1.2 | dvbInaIfReprovSrcNiuCommand | DVB-CABLE-INA-IF-MIB |