DV2-MIB :: cacLinkEnable

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › DV2-MIB › cacLinkEnable

cacLinkEnable

Module: DV2-MIB

OID (symbolic): DV2-MIB::cacLinkEnable

OID (numeric): 1.3.6.1.4.1.251.1.1.39.6.1.15

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Enable cac? When cacEnable has the value * yes, then the three CAC service routines are operational as defined, * no, then all connections are accepted regardless of required bandwidths CAC may be enabled or disabled by the manager at any time that the cacLinkState is ready. Enabling CAC will cause recalculatation of EB sums for that link. Disabling CAC will cause the EB sums for the link (also for associated V-SAPs) to be set to zero.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.251.1.1.39.6.1.15
snmpwalk -v2c -c public <target> DV2-MIB::cacLinkEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.251.1.1.39.6.1.15.1
snmpget -v2c -c public <target> DV2-MIB::cacLinkEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.251.1.1.39.6.1.15.1 i <value>

Start monitoring General DataComm (GDC) DV2/D2 ATM switch chassis with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DV2-MIB::cacLinkEnable OID value, configure state conditions and alerts, and monitor any General DataComm (GDC) DV2/D2 ATM switch chassis from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.251netcommDV2-MIB
1.3.6.1.4.1.251.1productsDV2-MIB
1.3.6.1.4.1.251.1.1dv2DV2-MIB
1.3.6.1.4.1.251.1.1.39dv2CacDV2-MIB
1.3.6.1.4.1.251.1.1.39.6cacPerLinkTableDV2-MIB
1.3.6.1.4.1.251.1.1.39.6.1cacPerLinkEntryDV2-MIB
1.3.6.1.4.1.251.1.1.39.6.1.15cacLinkEnableDV2-MIB