All MIBs › DSX-TE1-MIB › nndsxT1E1IfStatusLineStatus
nndsxT1E1IfStatusLineStatus
Module: DSX-TE1-MIB
OID (symbolic): DSX-TE1-MIB::nndsxT1E1IfStatusLineStatus
OID (numeric): 1.3.6.1.4.1.562.73.1.1.2.1.2.1.2.1.1.1
Node type: OBJECT-TYPE
Type: Bits
Access: read-only
Description: The summary of the status RRAIStatus - Recieve RAI (Recieve Alarm Indication), TRAIStatus - Transmit RAI , RLOSStatus - Recieve Loss Of Sync, RISStatus - Recieve Idle Signal REXZStatus - Recieve Excessive Zeros, LORCStatus - Loss Of Recive Clock (LORC), TDEStatus - transmit pulse density, SendLineCode - transmit linecode SendPayLoadCode - transmit paylode code SendResetCode - transmit reset code, SendTE1Code - transmit T1/E1 linecode, SendPattern - transmit T1/E1 Pattern, RcvTestCode - recive test code, LoopbackStatus - Status of Loop back, TAISStatus - Transmit Alarm Indication Siganl, RAISStatus - Recieve Alarm Indication Signal, LOFStatus - Loss Of Frame.
What is nndsxT1E1IfStatusLineStatus?
A BITS value summarizing the interface's real-time line status flags — receive/transmit RAI, loss of sync, idle signal, excessive zeros, loss of receive clock, alarm-indication signal states, and which line/pattern/reset code the interface is currently sending or receiving. An admin polls this to get a one-shot snapshot of everything currently wrong (or in progress, like an active loopback) on the line instead of reading each individual alarm bit separately.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.73.1.1.2.1.2.1.2.1.1.1 snmpwalk -v2c -c public <target> DSX-TE1-MIB::nndsxT1E1IfStatusLineStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.73.1.1.2.1.2.1.2.1.1.1.1 snmpget -v2c -c public <target> DSX-TE1-MIB::nndsxT1E1IfStatusLineStatus.1
Start monitoring Nortel DSX T1/E1 interface module/panel with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DSX-TE1-MIB::nndsxT1E1IfStatusLineStatus OID value, configure state conditions and alerts, and monitor any Nortel DSX T1/E1 interface module/panel from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.73 | ntEnterpriseData | NT-ENTERPRISE-DATA-MIB |
| 1.3.6.1.4.1.562.73.1 | ntEnterpriseDataMibs | NT-ENTERPRISE-DATA-MIB |
| 1.3.6.1.4.1.562.73.1.1 | ntEnterpriseDataTasmanMibs | NT-ENTERPRISE-DATA-MIB |
| 1.3.6.1.4.1.562.73.1.1.2 | ntEnterpriseDataTasmanInterfaces | NT-ENTERPRISE-DATA-MIB |
| 1.3.6.1.4.1.562.73.1.1.2.1 | nndsxMIB | DSX-TC-MIB |
| 1.3.6.1.4.1.562.73.1.1.2.1.2 | nndsxT1E1IfGroup | DSX-TC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.73.1.1.2.1.2.1 | nndsxT1E1MIB | DSX-TE1-MIB |
| 1.3.6.1.4.1.562.73.1.1.2.1.2.1.2 | nndsxT1E1IfStatusGroup | DSX-TE1-MIB |
| 1.3.6.1.4.1.562.73.1.1.2.1.2.1.2.1 | nndsxT1E1IfStatusTable | DSX-TE1-MIB |
| 1.3.6.1.4.1.562.73.1.1.2.1.2.1.2.1.1 | nndsxT1E1IfStatusEntry | DSX-TE1-MIB |
| 1.3.6.1.4.1.562.73.1.1.2.1.2.1.2.1.1.1 | nndsxT1E1IfStatusLineStatus | DSX-TE1-MIB |