All MIBs › DSX-TE1-MIB › nndsxT1E1IfConfigLineCode
nndsxT1E1IfConfigLineCode
Module: DSX-TE1-MIB
OID (symbolic): DSX-TE1-MIB::nndsxT1E1IfConfigLineCode
OID (numeric): 1.3.6.1.4.1.562.73.1.1.2.1.2.1.1.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This variable describes the variety of Zero Code Suppression used on the link, which in turn affects a number of its characteristics.
b8zs refers to the use of a specified pattern of normal bits and bipolar violations which are used to replace a sequence of eight zero bits.
ami refers to a mode wherein no zero code suppression is present and the line encoding does not solve the problem directly. In this application, the higher layer must provide data which meets or exceeds the pulse density re- quirements, such as inverting HDLC data.
--************************************************************************ -- Added by Smita , Wipro Technologies, to incorporate an OE1 card
E1 links, with or without CRC, use dsx1HDB3 or dsx1AMI.
What is nndsxT1E1IfConfigLineCode?
Configures the zero-code-suppression line encoding used on the wire — B8ZS, AMI, or (for E1, per the vendor's later addition) HDB3. An admin picks the value that matches the carrier's provisioning; a mismatch here (e.g. AMI configured against a B8ZS circuit) typically shows up as bipolar violations on the line.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.73.1.1.2.1.2.1.1.1.1.5 snmpwalk -v2c -c public <target> DSX-TE1-MIB::nndsxT1E1IfConfigLineCode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.73.1.1.2.1.2.1.1.1.1.5.1 snmpget -v2c -c public <target> DSX-TE1-MIB::nndsxT1E1IfConfigLineCode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.73.1.1.2.1.2.1.1.1.1.5.1 i <value>
Start monitoring Nortel DSX T1/E1 interface module/panel with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DSX-TE1-MIB::nndsxT1E1IfConfigLineCode OID value, configure state conditions and alerts, and monitor any Nortel DSX T1/E1 interface module/panel from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.73 | ntEnterpriseData | NT-ENTERPRISE-DATA-MIB |
| 1.3.6.1.4.1.562.73.1 | ntEnterpriseDataMibs | NT-ENTERPRISE-DATA-MIB |
| 1.3.6.1.4.1.562.73.1.1 | ntEnterpriseDataTasmanMibs | NT-ENTERPRISE-DATA-MIB |
| 1.3.6.1.4.1.562.73.1.1.2 | ntEnterpriseDataTasmanInterfaces | NT-ENTERPRISE-DATA-MIB |
| 1.3.6.1.4.1.562.73.1.1.2.1 | nndsxMIB | DSX-TC-MIB |
| 1.3.6.1.4.1.562.73.1.1.2.1.2 | nndsxT1E1IfGroup | DSX-TC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.73.1.1.2.1.2.1 | nndsxT1E1MIB | DSX-TE1-MIB |
| 1.3.6.1.4.1.562.73.1.1.2.1.2.1.1 | nndsxT1E1IfConfigGroup | DSX-TE1-MIB |
| 1.3.6.1.4.1.562.73.1.1.2.1.2.1.1.1 | nndsxT1E1IfConfigLineTable | DSX-TE1-MIB |
| 1.3.6.1.4.1.562.73.1.1.2.1.2.1.1.1.1 | nndsxT1E1IfConfigLineEntry | DSX-TE1-MIB |
| 1.3.6.1.4.1.562.73.1.1.2.1.2.1.1.1.1.5 | nndsxT1E1IfConfigLineCode | DSX-TE1-MIB |