All MIBs › DSX-TE1-MIB › nndsxT1E1IfAlarmStatusAlarmStatus
nndsxT1E1IfAlarmStatusAlarmStatus
Module: DSX-TE1-MIB
OID (symbolic): DSX-TE1-MIB::nndsxT1E1IfAlarmStatusAlarmStatus
OID (numeric): 1.3.6.1.4.1.562.73.1.1.2.1.2.1.2.2.1.1
Node type: OBJECT-TYPE
Type: Bits
Access: read-only
Description: Alarm Status of T1/E1 interface. RRAI - Recieve Rx Alarm Indication, TRAI - Transmit Rx Alarm Indication, RAIS - Recieve Alarm Indication Signal, TAIS - Transmit Alarm Indication Signal, RLOF - Recieve Loss Of Frame, RLOS - Recieve Loss Of Signal, Loopback - if looped back state is true, RIS - Recieve Idle Signal, REXZ - Recieve Excessive Zeros, RFEBE - Recieve Far End Block Error, RPE - Recieve Parity Error, RCPE - Recieve C-Parity Error, LORC - Loss Of Recieve Clock, TPDE - Transmit Pulse DEnsity, TFEBE - Transmit Far End Block Error, ibTest - InBand Test running if true.
What is nndsxT1E1IfAlarmStatusAlarmStatus?
A BITS value giving the current set of active alarms on the T1/E1 interface — receive/transmit RAI and AIS, loss of frame, loss of signal, loopback state, various far-end block-error conditions, loss of receive clock, and whether an in-band test is running. An admin reads this to see, in a single poll, exactly which alarm conditions are presently asserted on the line, which is the fastest way to triage why a circuit is misbehaving.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.73.1.1.2.1.2.1.2.2.1.1 snmpwalk -v2c -c public <target> DSX-TE1-MIB::nndsxT1E1IfAlarmStatusAlarmStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.73.1.1.2.1.2.1.2.2.1.1.1 snmpget -v2c -c public <target> DSX-TE1-MIB::nndsxT1E1IfAlarmStatusAlarmStatus.1
Start monitoring Nortel DSX T1/E1 interface module/panel with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DSX-TE1-MIB::nndsxT1E1IfAlarmStatusAlarmStatus OID value, configure state conditions and alerts, and monitor any Nortel DSX T1/E1 interface module/panel from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.73 | ntEnterpriseData | NT-ENTERPRISE-DATA-MIB |
| 1.3.6.1.4.1.562.73.1 | ntEnterpriseDataMibs | NT-ENTERPRISE-DATA-MIB |
| 1.3.6.1.4.1.562.73.1.1 | ntEnterpriseDataTasmanMibs | NT-ENTERPRISE-DATA-MIB |
| 1.3.6.1.4.1.562.73.1.1.2 | ntEnterpriseDataTasmanInterfaces | NT-ENTERPRISE-DATA-MIB |
| 1.3.6.1.4.1.562.73.1.1.2.1 | nndsxMIB | DSX-TC-MIB |
| 1.3.6.1.4.1.562.73.1.1.2.1.2 | nndsxT1E1IfGroup | DSX-TC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.73.1.1.2.1.2.1 | nndsxT1E1MIB | DSX-TE1-MIB |
| 1.3.6.1.4.1.562.73.1.1.2.1.2.1.2 | nndsxT1E1IfStatusGroup | DSX-TE1-MIB |
| 1.3.6.1.4.1.562.73.1.1.2.1.2.1.2.2 | nndsxT1E1IfAlarmStatusTable | DSX-TE1-MIB |
| 1.3.6.1.4.1.562.73.1.1.2.1.2.1.2.2.1 | nndsxT1E1IfAlarmStatusEntry | DSX-TE1-MIB |
| 1.3.6.1.4.1.562.73.1.1.2.1.2.1.2.2.1.1 | nndsxT1E1IfAlarmStatusAlarmStatus | DSX-TE1-MIB |