DSMON-MIB :: dsmonPdistTopNCtlGrantedSize

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DSMON-MIB › dsmonPdistTopNCtlGrantedSize

dsmonPdistTopNCtlGrantedSize

Module: DSMON-MIB

OID (symbolic): DSMON-MIB::dsmonPdistTopNCtlGrantedSize

OID (numeric): 1.3.6.1.2.1.16.26.1.3.3.1.8

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description: The maximum number of dsmonPdist entries in this report.

When the associated dsmonPdistTopNCtlRequestedSize object is created or modified, the probe SHOULD set this object as closely to the requested value as is possible for the particular implementation and available resources. The probe MUST NOT lower this value except as a result of a set to the associated dsmonPdistTopNCtlRequestedSize object.

Protocol entries with the highest value of dsmonPdistTopNRate or dsmonPdistTopNHCRate (depending on the value of the associated dsmonPdistTopNCtlRateBase object) shall be placed in this table in decreasing order of this rate until there is no more room or until there are no more dsmonPdist entries.

What is dsmonPdistTopNCtlGrantedSize?

The number of entries the probe actually committed to producing for this report, which may be lower than dsmonPdistTopNCtlRequestedSize if resources are limited.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.16.26.1.3.3.1.8
snmpwalk -v2c -c public <target> DSMON-MIB::dsmonPdistTopNCtlGrantedSize

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.16.26.1.3.3.1.8.1
snmpget -v2c -c public <target> DSMON-MIB::dsmonPdistTopNCtlGrantedSize.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> dsmonPdistTopNCtlGrantedSize.1

Start monitoring RMON probe/DiffServ-aware router or switch (DSCP monitoring, vendor-neutral IETF standard RFC 3287) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DSMON-MIB::dsmonPdistTopNCtlGrantedSize OID value, configure state conditions and alerts, and monitor any RMON probe/DiffServ-aware router or switch (DSCP monitoring, vendor-neutral IETF standard RFC 3287) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAPERTUS-NPG-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.16rmonITOUCHHUB
Numeric OIDNameModule
1.3.6.1.2.1.16.26dsmonMIBDSMON-MIB
1.3.6.1.2.1.16.26.1dsmonObjectsDSMON-MIB
1.3.6.1.2.1.16.26.1.3dsmonPdistObjectsDSMON-MIB
1.3.6.1.2.1.16.26.1.3.3dsmonPdistTopNCtlTableDSMON-MIB
1.3.6.1.2.1.16.26.1.3.3.1dsmonPdistTopNCtlEntryDSMON-MIB
1.3.6.1.2.1.16.26.1.3.3.1.8dsmonPdistTopNCtlGrantedSizeDSMON-MIB