DS3-MIB :: dsx3IntervalPESs

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsDS3-MIBdsx3IntervalPESs

dsx3IntervalPESs

Module: DS3-MIB

OID (symbolic): DS3-MIB::dsx3IntervalPESs

OID (numeric): 1.3.6.1.2.1.10.30.7.1.3

Node type: OBJECT-TYPE

Type: PerfIntervalCount

Access: read-only

Description: The counter associated with the number of P-bit Errored Seconds.

What is dsx3IntervalPESs?

This counter measures the number of P-bit Errored Seconds that occurred during a specific 15-minute interval on a DS3 line, where the P-bit refers to the parity bit used in DS3 framing. Network operators monitor this metric to detect signal quality degradation and identify periods when the DS3 interface experienced bit errors. High values indicate line problems that may require maintenance or investigation.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.30.7.1.3
snmpwalk -v2c -c public <target> DS3-MIB::dsx3IntervalPESs

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.10.30.7.1.3.1
snmpget -v2c -c public <target> DS3-MIB::dsx3IntervalPESs.1

Start monitoring Router/carrier access equipment with T3/E3 interfaces (vendor-neutral IETF standard RFC 3896) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DS3-MIB::dsx3IntervalPESs OID value, configure state conditions and alerts, and monitor any Router/carrier access equipment with T3/E3 interfaces (vendor-neutral IETF standard RFC 3896) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAXON-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.10transmissionCHECKPOINT-MIB-2
Numeric OIDNameModule
1.3.6.1.2.1.10.30ds3DS3-MIB
1.3.6.1.2.1.10.30.7dsx3IntervalTableDS3-MIB
1.3.6.1.2.1.10.30.7.1dsx3IntervalEntryDS3-MIB
1.3.6.1.2.1.10.30.7.1.3dsx3IntervalPESsDS3-MIB