DS3-MIB :: dsx3FarEndUnitCode

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsDS3-MIBdsx3FarEndUnitCode

dsx3FarEndUnitCode

Module: DS3-MIB

OID (symbolic): DS3-MIB::dsx3FarEndUnitCode

OID (numeric): 1.3.6.1.2.1.10.30.9.1.5

Node type: OBJECT-TYPE

Type: DisplayString

Access: read-write

Description: This is the Far End code that identifies the equipment location within a bay. It is sent within the Path Identification Message.

What is dsx3FarEndUnitCode?

This holds the Far End Unit code identifying the equipment's location within a bay at the remote site, part of the Path Identification Message. Admins use it alongside dsx3FarEndFrameIDCode to pin down the exact physical position of the far-end equipment.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.30.9.1.5
snmpwalk -v2c -c public <target> DS3-MIB::dsx3FarEndUnitCode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.10.30.9.1.5.1
snmpget -v2c -c public <target> DS3-MIB::dsx3FarEndUnitCode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.2.1.10.30.9.1.5.1 s <value>

Start monitoring Router/carrier access equipment with T3/E3 interfaces (vendor-neutral IETF standard RFC 3896) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DS3-MIB::dsx3FarEndUnitCode OID value, configure state conditions and alerts, and monitor any Router/carrier access equipment with T3/E3 interfaces (vendor-neutral IETF standard RFC 3896) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAXON-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.10transmissionCHECKPOINT-MIB-2
Numeric OIDNameModule
1.3.6.1.2.1.10.30ds3DS3-MIB
1.3.6.1.2.1.10.30.9dsx3FarEndConfigTableDS3-MIB
1.3.6.1.2.1.10.30.9.1dsx3FarEndConfigEntryDS3-MIB
1.3.6.1.2.1.10.30.9.1.5dsx3FarEndUnitCodeDS3-MIB