All MIBs › DS3-MIB › dsx3CurrentLESs
dsx3CurrentLESs
Module: DS3-MIB
OID (symbolic): DS3-MIB::dsx3CurrentLESs
OID (numeric): 1.3.6.1.2.1.10.30.6.1.8
Node type: OBJECT-TYPE
Type: PerfCurrentCount
Access: read-only
Description: The number of Line Errored Seconds.
What is dsx3CurrentLESs?
This OID counts the number of Line Errored Seconds in the current measurement interval on a DS3 (T3) telecommunications circuit, where errors occur but the line stays synchronized. This metric shows how many one-second periods had at least one transmission error, indicating line quality degradation. A telecom operator would monitor this counter to detect when a T3 circuit needs maintenance before total failure occurs.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.30.6.1.8 snmpwalk -v2c -c public <target> DS3-MIB::dsx3CurrentLESs
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.30.6.1.8.1 snmpget -v2c -c public <target> DS3-MIB::dsx3CurrentLESs.1
Start monitoring Router/carrier access equipment with T3/E3 interfaces (vendor-neutral IETF standard RFC 3896) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DS3-MIB::dsx3CurrentLESs OID value, configure state conditions and alerts, and monitor any Router/carrier access equipment with T3/E3 interfaces (vendor-neutral IETF standard RFC 3896) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.30 | ds3 | DS3-MIB |
| 1.3.6.1.2.1.10.30.6 | dsx3CurrentTable | DS3-MIB |
| 1.3.6.1.2.1.10.30.6.1 | dsx3CurrentEntry | DS3-MIB |
| 1.3.6.1.2.1.10.30.6.1.8 | dsx3CurrentLESs | DS3-MIB |