DS3-MIB :: dsx3CurrentCESs

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsDS3-MIBdsx3CurrentCESs

dsx3CurrentCESs

Module: DS3-MIB

OID (symbolic): DS3-MIB::dsx3CurrentCESs

OID (numeric): 1.3.6.1.2.1.10.30.6.1.10

Node type: OBJECT-TYPE

Type: PerfCurrentCount

Access: read-only

Description: The number of C-bit Errored Seconds.

What is dsx3CurrentCESs?

This counter tracks the number of C-bit Errored Seconds occurring on a DS3/E3 high-speed transmission line during the current 15-minute measurement interval. The C-bit framing format embeds error indicators in control bits, allowing real-time error detection without disrupting data flow. An operator monitoring line quality would watch this value to identify intermittent transmission errors and determine whether maintenance or line replacement is needed.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.30.6.1.10
snmpwalk -v2c -c public <target> DS3-MIB::dsx3CurrentCESs

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.10.30.6.1.10.1
snmpget -v2c -c public <target> DS3-MIB::dsx3CurrentCESs.1

Start monitoring Router/carrier access equipment with T3/E3 interfaces (vendor-neutral IETF standard RFC 3896) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DS3-MIB::dsx3CurrentCESs OID value, configure state conditions and alerts, and monitor any Router/carrier access equipment with T3/E3 interfaces (vendor-neutral IETF standard RFC 3896) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAXON-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.10transmissionCHECKPOINT-MIB-2
Numeric OIDNameModule
1.3.6.1.2.1.10.30ds3DS3-MIB
1.3.6.1.2.1.10.30.6dsx3CurrentTableDS3-MIB
1.3.6.1.2.1.10.30.6.1dsx3CurrentEntryDS3-MIB
1.3.6.1.2.1.10.30.6.1.10dsx3CurrentCESsDS3-MIB