All MIBs › DS1-MIB › dsx1FarEndCurrentSESs
dsx1FarEndCurrentSESs
Module: DS1-MIB
OID (symbolic): DS1-MIB::dsx1FarEndCurrentSESs
OID (numeric): 1.3.6.1.2.1.10.18.10.1.5
Node type: OBJECT-TYPE
Type: PerfCurrentCount
Access: read-only
Description: The number of Far End Severely Errored Seconds.
What is dsx1FarEndCurrentSESs?
Count of Severely Errored Seconds reported by the far end of this DS1 link during the current 15-minute interval; a rising value points to a serious quality problem as seen from the remote end, even if the near end looks clean.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.18.10.1.5 snmpwalk -v2c -c public <target> DS1-MIB::dsx1FarEndCurrentSESs
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.18.10.1.5.1 snmpget -v2c -c public <target> DS1-MIB::dsx1FarEndCurrentSESs.1
Start monitoring Router/telecom equipment with T1/E1 (DS1/E1/DS2/E2) interfaces (vendor-neutral IETF standard RFC 4805) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DS1-MIB::dsx1FarEndCurrentSESs OID value, configure state conditions and alerts, and monitor any Router/telecom equipment with T1/E1 (DS1/E1/DS2/E2) interfaces (vendor-neutral IETF standard RFC 4805) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.18 | ds1 | DS1-MIB |
| 1.3.6.1.2.1.10.18.10 | dsx1FarEndCurrentTable | DS1-MIB |
| 1.3.6.1.2.1.10.18.10.1 | dsx1FarEndCurrentEntry | DS1-MIB |
| 1.3.6.1.2.1.10.18.10.1.5 | dsx1FarEndCurrentSESs | DS1-MIB |