All MIBs › DPT-SCSI-MIB › dptScsiBusMaxTransferRate
dptScsiBusMaxTransferRate
Module: DPT-SCSI-MIB
OID (symbolic): DPT-SCSI-MIB::dptScsiBusMaxTransferRate
OID (numeric): 1.3.6.1.4.1.1597.1.3.1.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The SCSI Bus maximum transfer rate in MB/s. Valid values are 4, 5, 8, 10, 20, 40, 80, 100, 160, etc., depending on the SCSI technology used.
What is dptScsiBusMaxTransferRate?
The maximum transfer rate, in MB/s, supported on this SCSI bus (e.g. 20, 40, 80, 160) depending on the SCSI technology in use. Use this as the theoretical ceiling when evaluating whether observed throughput on the bus is reasonable.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1597.1.3.1.1.4 snmpwalk -v2c -c public <target> DPT-SCSI-MIB::dptScsiBusMaxTransferRate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1597.1.3.1.1.4.1 snmpget -v2c -c public <target> DPT-SCSI-MIB::dptScsiBusMaxTransferRate.1
Start monitoring DPT (Adaptec) SCSI host-bus-adapter with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DPT-SCSI-MIB::dptScsiBusMaxTransferRate OID value, configure state conditions and alerts, and monitor any DPT (Adaptec) SCSI host-bus-adapter from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1597 | dpt | DPT-SCSI-MIB |
| 1.3.6.1.4.1.1597.1 | dptScsi | DPT-SCSI-MIB |
| 1.3.6.1.4.1.1597.1.3 | dptScsiBus | DPT-SCSI-MIB |
| 1.3.6.1.4.1.1597.1.3.1 | dptScsiBusTable | DPT-SCSI-MIB |
| 1.3.6.1.4.1.1597.1.3.1.1 | dptScsiBusEntry | DPT-SCSI-MIB |
| 1.3.6.1.4.1.1597.1.3.1.1.4 | dptScsiBusMaxTransferRate | DPT-SCSI-MIB |