DPT-SCSI-MIB DEFINITIONS ::= BEGIN --***************************************************************************** -- -- Copyright(c) 1992-1999, All Rights Reserved. -- Distributed Processing Technology, Inc. -- 140 Candace Dr. -- Maitland, FL 32751, USA -- Phone: (407) 830-5522 Fax: (407) 260-5366 -- -- Title: -- DPT-SCSI-MIB -- -- Abstract: -- This is the DPT SCSI system MIB. This MIB supports -- DPT's SmartRAID V and SmartRAID VI product lines. -- -- Current Status: -- MIB is modified to support the latest Gen VI Hardware -- The Trap definition has been modified to reflect NetWare standards -- -- Notes: -- -- Several textual conventions (enumeration types) in this MIB use common -- value names. The value 'invalid' means that for some reason the agent -- is unable to return a proper value for an Object Identifier, for -- example due to an operating system error. The value 'notSupported' -- indicates that either the agent or the object (controller, device, -- etc.) does not support the Object Identifier. For example, the -- deprecated Object Identifier dptScsiDevErrorsAboveThreshold will return -- 'notSupported.' The value 'notApplicable' indicates that a particular -- Object Identifier is not applicable for the object instance. For -- example, not all controllers have temperature probes; on such -- controllers the dptScsiHbaTemperature Object Identifier will return -- 'notApplicable.' -- -- $Revision: 19 $ -- -- --***************************************************************************** IMPORTS enterprises, Counter, Gauge, TimeTicks FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215; -- -- Textual conventions -- DisplayString ::= OCTET STRING -- -- A DptSignature is a string in the form -- "; Version: ; Created: --" -- where indicates a field as listed below: -- -- is a string describing the Object Identifer instance. -- is a string describing the version of the object instance -- is the numeric month the object instance was created/compiled -- (1-12). -- is the numeric day the object instance was created/compiled -- (1-31). -- is the four-digit numeric year the object instance was created/ -- compiled. -- -- and will not contain semicolons (';'). -- -- If the agent is unable to retrieve the signature information, the -- DptSignature will be "DPT Signature Unavailable". -- DptSignature ::= DisplayString HostBusType ::= INTEGER { invalid(1), isa(2), eisa(3), pci-32(4), pci-64(5) } ScsiBusType ::= INTEGER { invalid(1), singleEnded(2), differential(3), lvd(4), fibreChannel(5) } IrqType ::= INTEGER { invalid(1), level(2), edge(3) } DrqNumber ::= INTEGER { invalid(1), notApplicable(2), zero(3), five(4), six(5), seven(6) } MemoryBankType ::= INTEGER { invalid(1), notApplicable(2), empty(3), standard-SIMM(4), standard-DIMM(5), sm4000DPT-ECC-SIMM(6), sm4041DPT-ECC-DIMM(7), sm4050DPT-ECC-EDO-SIMM(8), dm4050DPT-ECC-EDO-SO-DIMM(9), dm4070DPT-ECC-SD-DIMM(10) } MemoryBankSize ::= INTEGER { invalid(1), notApplicable(2), empty(3), oneMB(4), fourMB(5), sixteenMB(6), thirtytwoMB(7), sixtyfourMB(8), hundredtwentyeightMB(9), twohundredfiftysixMB(10), fivehundredtwelveMB(11), thousandtwentyfourMB(12) } CachingModule ::= INTEGER { invalid(1), notApplicable(2), none(3), cm4000(4), rc4040(5), rc4041(6), embedded(7), ra4050(8), ra4060(9) } RaidModule ::= INTEGER { invalid(1), notApplicable(2), none(3), dm4000(4), rc4040(5), rc4041(6), embedded(7), ra4050(8), ra4060(9) } BatteryBackupModule ::= INTEGER { invalid(1), notApplicable(2), none(3), embedded(4), bb4050(5), bb4060(6) } RaidType ::= INTEGER { invalid(1), notAssigned(2), raid-0(3), raid-1(4), raid-5(5), redirected(6), hotSpare(7) } SoftwareType ::= INTEGER { firmware(1), driver(2), operatingSystem(3), application(4) } BusWidth ::= INTEGER { invalid(1), serial(2), narrow(3), wide(4), wide32(5), notApplicable(6) } BusTerminationType ::= INTEGER { invalid(1), on(2), off(3), highOnly(4), auto(5) } ScsiVersion ::= INTEGER { invalid(1), scsi-I(2), scsi-II(3), scsi-III(4) } DeviceType ::= INTEGER { disk(1), tape(2), printer(3), processor(4), writeOnce(5), cdRom(6), scanner(7), optical(8), jukebox(9), commDev(10), graphicsType10(11), graphicsType11(12), scc(13), ses(14), saf-te(97), host(98), unknown(99) } DeviceStatus ::= INTEGER { invalid(1), optimal(2), verifying(3), failed(4), warning(5), formatting(6), formatCertifying(7), missing(8), notCreated(9), degraded(10), building(11), rebuilding(12), verifyFixing(13), abortActivity(14) } DeviceWriteMode ::= INTEGER { invalid(1), notApplicable(2), writeBack(3), writeThrough(4), noCache(5) } YesNoStatus ::= INTEGER { invalid(1), notApplicable(2), notSupported(3), yes(4), no(5) } LowHighStatus ::= INTEGER { invalid(1), notApplicable(2), notSupported(3), low(4), normal(5), high(6), veryHigh(7) } BatteryStatus ::= INTEGER { invalid(1), notApplicable(2), none(3), trickleCharge(4), fastCharge(5), discharge(6), bad(7), full(8), initCharge(9), initDischarge(10), initRecharge(11), maintenanceDischarge(12), maintenanceCharge(13) } HbaGenStatus ::= INTEGER { invalid(1), notSupported(2), ok(3), fail(4), error(5) } CommandType ::= INTEGER { hostCmd(1), scsiCmd(2) } RowStatus ::= INTEGER { invalid(1), active(2), notInService(3), notReady(4), createAndGo(5), createAndWait(6), destroy(7) } -- -- DPT's enterprise number, -- and dptScsi hierarchy. -- dpt OBJECT IDENTIFIER ::= { enterprises 1597 } dptScsi OBJECT IDENTIFIER ::= { dpt 1 } -- -- DPT SCSI System MIB Groups -- dptScsiSys OBJECT IDENTIFIER ::= { dptScsi 1 } dptScsiHba OBJECT IDENTIFIER ::= { dptScsi 2 } dptScsiBus OBJECT IDENTIFIER ::= { dptScsi 3 } dptScsiDev OBJECT IDENTIFIER ::= { dptScsi 4 } dptScsiArr OBJECT IDENTIFIER ::= { dptScsi 5 } dptScsiStats OBJECT IDENTIFIER ::= { dptScsi 6 } dptScsiEvent OBJECT IDENTIFIER ::= { dptScsi 7 } dptScsiDummy OBJECT IDENTIFIER ::= { dptScsi 8 } -- -- dptScsiSys Group -- -- Implementation of this group is mandatory. -- -- These objects identify the capabilities and versions of DPT SCSI -- System modules. -- dptScsiSysRevLevel OBJECT-TYPE SYNTAX DptSignature ACCESS read-only STATUS mandatory DESCRIPTION "DPT SCSI system SNMP agent revision information." ::= { dptScsiSys 1 } dptScsiSysEngineSignature OBJECT-TYPE SYNTAX DptSignature ACCESS read-only STATUS mandatory DESCRIPTION "DPT signature for the DPT engine. This contains information on engine version and creation date/time." ::= { dptScsiSys 2 } dptScsiSysDriverSignature OBJECT-TYPE SYNTAX DptSignature ACCESS read-only STATUS mandatory DESCRIPTION "DPT signature for the driver currently in use by the SNMP agent. This contains information on driver version and creation date/time." ::= { dptScsiSys 3 } dptScsiSysEventLoggerSignature OBJECT-TYPE SYNTAX DptSignature ACCESS read-only STATUS mandatory DESCRIPTION "DPT signature for the event logger/broadcaster currently in use by the SNMP agent. This contains information on event logger/broadcaster version and creation date/time." ::= { dptScsiSys 4 } -- SCSI MIB Revision -- ================= -- A Management Agent conforming to this document will return a mibRevMajor -- of one (1) and a mibRevMinor of one (1). -- -- dptScsiSysMibRevMajor OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The Major Revision level. A change in the major revision level represents a major change in the architecture of the MIB. A change in the major revision level may indicate a significant change in the information supported and/or the meaning of the supported information, correct interpretation of data may require a MIB document with the same major revision level." ::= { dptScsiSys 5 } dptScsiSysMibRevMinor OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The Minor Revision level. A change in the minor revision level may represent some minor additional support; no changes to any pre-existing information has occurred." ::= { dptScsiSys 6 } -- -- dptScsiHba group -- -- Implementation of this group is mandatory. -- dptScsiHbaTable OBJECT-TYPE SYNTAX SEQUENCE OF DptScsiHbaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of RAID controllers managed by the DPT SCSI system." ::= { dptScsiHba 1 } dptScsiHbaEntry OBJECT-TYPE SYNTAX DptScsiHbaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A set of parameters that describe/control a DPT RAID controller. See 'SmartRAID User's Manual' for detailed explanation of the parameters." INDEX { dptScsiHbaNumber } ::= { dptScsiHbaTable 1 } DptScsiHbaEntry ::= SEQUENCE { dptScsiHbaNumber INTEGER, dptScsiHbaVendor DisplayString, dptScsiHbaModel DisplayString, dptScsiHbaFirmware DisplayString, dptScsiHbaSerialNumber DisplayString, dptScsiHbaAddress INTEGER, dptScsiHbaHostBusType HostBusType, dptScsiHbaHostBusMaxTransferRate INTEGER, dptScsiHbaIrq INTEGER, dptScsiHbaIrqType IrqType, dptScsiHbaDrq DrqNumber, dptScsiHbaRaidModule RaidModule, dptScsiHbaCachingModule CachingModule, dptScsiHbaAudibleAlarmOn YesNoStatus, dptScsiHbaUpTime TimeTicks, dptScsiHbaEccEnabled YesNoStatus, dptScsiHbaBackgroundTaskPriority INTEGER, dptScsiHbaExclusionPeriodEnabled YesNoStatus, dptScsiHbaExclusionPeriodStart INTEGER, dptScsiHbaExclusionPeriodEnd INTEGER, dptScsiHbaMaxReadAheadPercentage INTEGER, dptScsiHbaMaxDirtyPagesPercentage INTEGER, dptScsiHbaWriteBackDelay INTEGER, dptScsiHbaTemperature LowHighStatus, dptScsiHbaVoltage LowHighStatus, dptScsiHbaBadMemoryAddress INTEGER, dptScsiHbaBatteryModule BatteryBackupModule, dptScsiHbaBatteryStatus BatteryStatus, dptScsiHbaHighestBusWithDevices INTEGER, dptScsiHbaGeneralStatus HbaGenStatus, dptScsiHbaSmorSignature DptSignature, dptScsiHbaBiosSignature DptSignature, dptScsiHbaNvramLayout DisplayString } dptScsiHbaNumber OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "An index that uniquely identifies a row in dptHbaTable that pertains to a particular controller. The value of this object is the logical device identifier for a DPT controller. As controllers are detected, they are assigned numbers incrementally, starting with 0." ::= { dptScsiHbaEntry 1 } dptScsiHbaVendor OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the vendor of the controller." ::= { dptScsiHbaEntry 2 } dptScsiHbaModel OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "The controller model identifier." ::= { dptScsiHbaEntry 3 } dptScsiHbaFirmware OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "The controller firmware version." ::= { dptScsiHbaEntry 4 } dptScsiHbaSerialNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The controller serial number." ::= { dptScsiHbaEntry 5 } dptScsiHbaAddress OBJECT-TYPE SYNTAX INTEGER (0..'FFFFFFFF'h) ACCESS read-only STATUS mandatory DESCRIPTION "The controller Address (normally displayed in hex.) It is a 32-bit value representing the memory address used by the controller" ::= { dptScsiHbaEntry 6 } dptScsiHbaHostBusType OBJECT-TYPE SYNTAX HostBusType ACCESS read-only STATUS mandatory DESCRIPTION "The type of host computer system bus this controller is attached to." ::= { dptScsiHbaEntry 7 } dptScsiHbaHostBusMaxTransferRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum possible transfer rate on the host bus in MB/s." ::= { dptScsiHbaEntry 8 } dptScsiHbaIrq OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The controller interrupt level." ::= { dptScsiHbaEntry 9 } dptScsiHbaIrqType OBJECT-TYPE SYNTAX IrqType ACCESS read-only STATUS mandatory DESCRIPTION "The controller interrupt type (Edge or Level)." ::= { dptScsiHbaEntry 10 } dptScsiHbaDrq OBJECT-TYPE SYNTAX DrqNumber ACCESS read-only STATUS deprecated DESCRIPTION "The controller DMA channel. This object is only applicable for ISA controllers. Its value is 'notApplicable' for the other types of controllers." ::= { dptScsiHbaEntry 11 } dptScsiHbaRaidModule OBJECT-TYPE SYNTAX RaidModule ACCESS read-only STATUS mandatory DESCRIPTION "Controller RAID module type: SmartRAID Millennium controllers support all RAID levels without the addition of a RAID Module. These controllers will show 'Embedded' for this object. SmartRAID Decade and Century controllers support RAID 0 and RAID 1 by default. RAID 5 support is added by attaching an RA40x0 RAID Accelerator module to the controller. If one is attached it will be indicated in this object." ::= { dptScsiHbaEntry 12 } dptScsiHbaCachingModule OBJECT-TYPE SYNTAX CachingModule ACCESS read-only STATUS deprecated DESCRIPTION "The controller caching module. 'Embedded' means that the disk array function is built inside the controller (SmartRAID products.)" ::= { dptScsiHbaEntry 13 } dptScsiHbaAudibleAlarmOn OBJECT-TYPE SYNTAX YesNoStatus ACCESS read-only STATUS mandatory DESCRIPTION "This returns the current status of the controller alarm." ::= { dptScsiHbaEntry 14 } dptScsiHbaUpTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Time elapsed (in hundredths of a second) since the controller was last booted." ::= { dptScsiHbaEntry 15 } dptScsiHbaEccEnabled OBJECT-TYPE SYNTAX YesNoStatus ACCESS read-only STATUS mandatory DESCRIPTION "This indicates whether or not the controller is using DPT ECC memory. 'Yes' means that the installed memory is DPT ECC memory and full ECC protection is active." ::= { dptScsiHbaEntry 16 } dptScsiHbaBackgroundTaskPriority OBJECT-TYPE SYNTAX INTEGER (1..10) ACCESS read-only STATUS mandatory DESCRIPTION "This object controls the priority of array background tasks such as Build, Rebuild and Verify for this controller. The values range from 1 to 10. A value of 1 is the slowest but uses the least amount of the controller's bandwidth. While a value of 10 is the fastest but it uses the most bandwidth. If operations take too long then increase the value for this object. If the system runs too slow when these tasks are active, then decrease the value for this object." ::= { dptScsiHbaEntry 17 } dptScsiHbaExclusionPeriodEnabled OBJECT-TYPE SYNTAX YesNoStatus ACCESS read-only STATUS deprecated DESCRIPTION "Controller exclution period is the time span during which it devotes 100% of its time fulfilling requests for data reads/writes and zero percent on background activities like build/rebuild of arrays. Setting this object to true sets the exclusion period as defined by dptScsiHbaExclusionPeriodStart and dptScsiHbaExclusionPeriodEnd objects. Otherwise, if it is set to false, the exclusion period no effect." ::= { dptScsiHbaEntry 18 } dptScsiHbaExclusionPeriodStart OBJECT-TYPE SYNTAX INTEGER (0..23) ACCESS read-only STATUS deprecated DESCRIPTION "Hour of beginning of the exclusion period. For example, a value of 0 means that the exclusion starts at 12 a.m. The maximum duration of an exclusion period can be 24 hours. Contoller exclution period is the time span during which it devotes 100% of its time fulfilling requests for data reads/writes and zero percent on background activities like build/rebuild of arrays." ::= { dptScsiHbaEntry 19 } dptScsiHbaExclusionPeriodEnd OBJECT-TYPE SYNTAX INTEGER (0..23) ACCESS read-only STATUS deprecated DESCRIPTION "Hour when exclusion period ends. For example, a value of 23 means that the exclusion ends at 11 p.m. The maximum duration of an exclusion period can be 24 hours. If dptScsiHbaExclusionPeriodStart is greater than dptScsiHbaExclusionPeriodEnd, it means that the exclusions period extends over the next day. Contoller exclution period is the time span during which it devotes 100% of its time fulfilling requests for data reads/writes and zero percent on background activities like build/rebuild of arrays." ::= { dptScsiHbaEntry 20 } dptScsiHbaMaxReadAheadPercentage OBJECT-TYPE SYNTAX INTEGER (0..80) ACCESS read-only STATUS deprecated DESCRIPTION "Max percentage of contoller cache RAM devoted to read-ahead pages. This value is not applicable to SmartRAID V and later controllers. For these controllers, this value will be set to 30." ::= { dptScsiHbaEntry 21 } dptScsiHbaMaxDirtyPagesPercentage OBJECT-TYPE SYNTAX INTEGER (0..100) ACCESS read-only STATUS deprecated DESCRIPTION "Max percentage of controller cache RAM that may contain dirty pages. This value is not applicable to SmartRAID V and later controllers. For these controllers, this value will be set to 80." ::= { dptScsiHbaEntry 22 } dptScsiHbaWriteBackDelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "Write-back delay in milliseconds. This value is not applicable to SmartRAID V and later controllers. For these controllers, this value will be set to 250." ::= { dptScsiHbaEntry 23 } dptScsiHbaTemperature OBJECT-TYPE SYNTAX LowHighStatus ACCESS read-only STATUS mandatory DESCRIPTION "Temperature status reported by the controller." ::= { dptScsiHbaEntry 24 } dptScsiHbaVoltage OBJECT-TYPE SYNTAX LowHighStatus ACCESS read-only STATUS mandatory DESCRIPTION "5V voltage status reported by the controller." ::= { dptScsiHbaEntry 25 } dptScsiHbaBadMemoryAddress OBJECT-TYPE SYNTAX INTEGER (0..'FFFFFFFF'h) ACCESS read-only STATUS mandatory DESCRIPTION "If the controller detects a cache RAM error, the address of the most recent error is stored here. Otherwise it indicates that no errors have been detected. Valid RAM addresses are from 1 to 0xffffffff." ::= { dptScsiHbaEntry 26 } dptScsiHbaBatteryModule OBJECT-TYPE SYNTAX BatteryBackupModule ACCESS read-only STATUS mandatory DESCRIPTION "The Battery Backup Module preserves all controller cache and local memory contents in the event of power loss to the system" ::= { dptScsiHbaEntry 27 } dptScsiHbaBatteryStatus OBJECT-TYPE SYNTAX BatteryStatus ACCESS read-only STATUS mandatory DESCRIPTION "Battery status reported by the controller." ::= { dptScsiHbaEntry 28 } dptScsiHbaHighestBusWithDevices OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The bus number of the highest numbered bus on this controller which has devices currently attached to it." ::= { dptScsiHbaEntry 29 } dptScsiHbaGeneralStatus OBJECT-TYPE SYNTAX HbaGenStatus ACCESS read-only STATUS mandatory DESCRIPTION "General controller status. The following are the possible values: ok - the controller and all components attached to it, such as disks and arrays, are OK. fail - a component attached to the controller is not OK. error - the agent cannot get status from the controller." ::= { dptScsiHbaEntry 30 } dptScsiHbaSmorSignature OBJECT-TYPE SYNTAX DptSignature ACCESS read-only STATUS mandatory DESCRIPTION "The controller S.M.O.R. revision information. Not available for SmartRAID IV and earlier controllers." ::= { dptScsiHbaEntry 31 } dptScsiHbaBiosSignature OBJECT-TYPE SYNTAX DptSignature ACCESS read-only STATUS mandatory DESCRIPTION "The controller B.I.O.S. revision information. Not available for SmartRAID IV and earlier controllers." ::= { dptScsiHbaEntry 32 } dptScsiHbaNvramLayout OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The controller NVRAM layout revision." ::= { dptScsiHbaEntry 33 } dptScsiHbaCacheSocketTable OBJECT-TYPE SYNTAX SEQUENCE OF DptScsiHbaCacheSocketEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of the cache memory module sockets on the controller." ::= { dptScsiHba 2 } dptScsiHbaCacheSocketEntry OBJECT-TYPE SYNTAX DptScsiHbaCacheSocketEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "These parameters describe the cache memory module sockets on a controller." INDEX { dptScsiHbaNumber, dptScsiHbaCacheSocketNumber } ::= { dptScsiHbaCacheSocketTable 1 } DptScsiHbaCacheSocketEntry ::= SEQUENCE { dptScsiHbaCacheSocketNumber INTEGER, dptScsiHbaCacheModuleType MemoryBankType, dptScsiHbaCacheModuleSize MemoryBankSize } dptScsiHbaCacheSocketNumber OBJECT-TYPE SYNTAX INTEGER (0..3) ACCESS read-only STATUS mandatory DESCRIPTION "A controller can have up to 4 cache sockets. This is the index in the table of cache memory module sockets." ::= { dptScsiHbaCacheSocketEntry 1 } dptScsiHbaCacheModuleType OBJECT-TYPE SYNTAX MemoryBankType ACCESS read-only STATUS mandatory DESCRIPTION "Type of a cache memory module." ::= { dptScsiHbaCacheSocketEntry 2 } dptScsiHbaCacheModuleSize OBJECT-TYPE SYNTAX MemoryBankSize ACCESS read-only STATUS mandatory DESCRIPTION "Size of a cache memory module." ::= { dptScsiHbaCacheSocketEntry 3 } -- -- dptScsiBus group -- -- Implementation of this group is mandatory. -- dptScsiBusTable OBJECT-TYPE SYNTAX SEQUENCE OF DptScsiBusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of the SCSI buses on a system." ::= { dptScsiBus 1 } dptScsiBusEntry OBJECT-TYPE SYNTAX DptScsiBusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "These parameters describe/control a SCSI Bus. The entry is indexed by dptScsiHbaNumber and dptScsiBusNumber. dptScsiHbaNumber determines to which controller the SCSI bus belongs and dptScsiBusNumber to which SCSI bus." INDEX { dptScsiHbaNumber, dptScsiBusNumber } ::= { dptScsiBusTable 1 } DptScsiBusEntry ::= SEQUENCE { dptScsiBusNumber INTEGER, dptScsiBusWidth BusWidth, dptScsiBusType ScsiBusType, dptScsiBusMaxTransferRate INTEGER, dptScsiBusHbaScsiId INTEGER, dptScsiBusHbaTermPower YesNoStatus, dptScsiBusHbaTermination BusTerminationType } dptScsiBusNumber OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "An index that, along with dptScsHbaNumber uniquely, identifies an entry in the dptScsiBusTable for a particular SCSI Bus." ::= { dptScsiBusEntry 1 } dptScsiBusWidth OBJECT-TYPE SYNTAX BusWidth ACCESS read-only STATUS mandatory DESCRIPTION "The SCSI Bus width." ::= { dptScsiBusEntry 2 } dptScsiBusType OBJECT-TYPE SYNTAX ScsiBusType ACCESS read-only STATUS mandatory DESCRIPTION "The SCSI Bus transceiver type." ::= { dptScsiBusEntry 3 } dptScsiBusMaxTransferRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The SCSI Bus maximum transfer rate in MB/s. Valid values are 4, 5, 8, 10, 20, 40, 80, 100, 160, etc., depending on the SCSI technology used." ::= { dptScsiBusEntry 4 } dptScsiBusHbaScsiId OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-only STATUS mandatory DESCRIPTION "The SCSI ID of the controller on this SCSI Bus." ::= { dptScsiBusEntry 5 } dptScsiBusHbaTermPower OBJECT-TYPE SYNTAX YesNoStatus ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the SCSI term-power setting (on/off) for this bus." ::= { dptScsiBusEntry 6 } dptScsiBusHbaTermination OBJECT-TYPE SYNTAX BusTerminationType ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the SCSI termination setting for this bus." ::= { dptScsiBusEntry 7 } -- -- dptScsiDev group -- -- A SCSI device can either be a physical devices or a logical -- device. The former is a physical SCSI device that is directly -- connected through a SCSI bus to a particular contoller. The latter -- is a logical entity is presented by the controller to the -- operating system. RAID-0, RAID-1 and RAID-5 arrays as well as -- Redirected drives are examples of logical devices. -- -- This group models all the physical devices. It also models -- RAID-0, RAID-1, RAID-5 and redirect types of logical devices. -- -- Implementation of this group is mandatory. -- dptScsiDevTable OBJECT-TYPE SYNTAX SEQUENCE OF DptScsiDevEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of SCSI devices managed by the SNMP agent." ::= { dptScsiDev 1 } dptScsiDevEntry OBJECT-TYPE SYNTAX DptScsiDevEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "These parameters describe/control a particular SCSI Device. The index for this entry is the logical device address of the SCSI device. The logical device address consists of five components: contoller number, SCSI bus number, Device ID, LUN and level." INDEX { dptScsiHbaNumber, dptScsiBusNumber, dptScsiDevId, dptScsiDevLun, dptScsiDevLevel } ::= { dptScsiDevTable 1 } DptScsiDevEntry ::= SEQUENCE { dptScsiDevId INTEGER, dptScsiDevLun INTEGER, dptScsiDevLevel INTEGER, dptScsiDevVendor DisplayString, dptScsiDevModel DisplayString, dptScsiDevRevision DisplayString, dptScsiDevSerialNumber DisplayString, dptScsiDevStatus DeviceStatus, dptScsiDevBusWidth BusWidth, dptScsiDevCapacity INTEGER, dptScsiDevLogicalBlockSize INTEGER, dptScsiDevPhysicalBlockSize INTEGER, dptScsiDevNegTransferRate INTEGER, dptScsiDevRemovable YesNoStatus, dptScsiDevEccEnabled YesNoStatus, dptScsiDevScsiVersion ScsiVersion, dptScsiDevSoftReset YesNoStatus, dptScsiDevCmdQueuing YesNoStatus, dptScsiDevLinkedCmds YesNoStatus, dptScsiDevSynchronous YesNoStatus, dptScsiDevRelAddr YesNoStatus, dptScsiDevSMART YesNoStatus, dptScsiDevSCAM YesNoStatus, dptScsiDevBadBlockNumber INTEGER, dptScsiDevBadBlockCount INTEGER, dptScsiDevErrorsAboveThreshold YesNoStatus, dptScsiDevDriveLockingOn YesNoStatus, dptScsiDevLastReqSenseInfo DisplayString, dptScsiDevReadCachingOn YesNoStatus, dptScsiDevReadCacheMaxRecord INTEGER, dptScsiDevWriteCachingOn YesNoStatus, dptScsiDevWriteCacheMaxRecord INTEGER, dptScsiDevWriteMode DeviceWriteMode, dptScsiDevSmartStatusOk YesNoStatus, dptScsiDevType DeviceType } dptScsiDevId OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-only STATUS mandatory DESCRIPTION "The SCSI ID of the device." ::= { dptScsiDevEntry 1 } dptScsiDevLun OBJECT-TYPE SYNTAX INTEGER (0..7) ACCESS read-only STATUS mandatory DESCRIPTION "The SCSI LUN (logical unit number) of the device." ::= { dptScsiDevEntry 2 } dptScsiDevLevel OBJECT-TYPE SYNTAX INTEGER (0..2) ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the Level of the device. Level 0 indicates physical devices, while level 1 and 2 indicate logical devices. It also gives its level in the containment hierarchy of devices. A device is a logical device if it contains other SCSI devices, otherwise it is a physical device. A level 1 array contains only physical devices as its members; a level 2 device has at least one level 1 array as a member. A level 2 device would be a RAID-10 or RAID-50 logical drive." ::= { dptScsiDevEntry 3 } dptScsiDevVendor OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the vendor of the device." ::= { dptScsiDevEntry 4 } dptScsiDevModel OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "The model name of the device." ::= { dptScsiDevEntry 5 } dptScsiDevRevision OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "The revision level of the device." ::= { dptScsiDevEntry 6 } dptScsiDevSerialNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The serial number of the device." ::= { dptScsiDevEntry 7 } dptScsiDevStatus OBJECT-TYPE SYNTAX DeviceStatus ACCESS read-only STATUS mandatory DESCRIPTION "The administrative state of the device. The following are all the possible values: invalid - current value is invalid. optimal - device is fully functional and is not running diagnostics that may impact performance. verifying - diagnostics are being run on the device. Performance of the device may be affected. failed - catastrophic failure has occurred. warning - user-specified error threshold has been crossed. Device failure may be imminent. formatting - device is being formatted. formatCertifying - a SCSI format with certify command in progress. missing - device is physically missing or does not respond to commands on the SCSI bus. notCreated - array has been defined by the user but the changes are have not been committed to the hardware. degraded - redundant array has a failed component which results in degraded performance and loss of fault-tolerance. building - array is in the process of building. verifyFixing - device is processing an SCSI verify fix command. abortActivity - this value allows the user to abort any background tasks on the controller, such as Build, Rebuild and Verify." ::= { dptScsiDevEntry 8 } dptScsiDevBusWidth OBJECT-TYPE SYNTAX BusWidth ACCESS read-only STATUS mandatory DESCRIPTION "The data width of the SCSI device (not applicable to logical devices)." ::= { dptScsiDevEntry 9 } dptScsiDevCapacity OBJECT-TYPE SYNTAX INTEGER (0..'FFFFFFFF'h) ACCESS read-only STATUS mandatory DESCRIPTION "The storage capacity of the device in MB." ::= { dptScsiDevEntry 10 } dptScsiDevLogicalBlockSize OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "Logical block size of the device in bytes." ::= { dptScsiDevEntry 11 } dptScsiDevPhysicalBlockSize OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "Physical block size of the device in bytes. Not applicable for logical devices and will be the logical block size." ::= { dptScsiDevEntry 12 } dptScsiDevNegTransferRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The negotiated transfer rate of the device in MB/s. For logical devices, this value is not applicable and will return 0." ::= { dptScsiDevEntry 13 } dptScsiDevRemovable OBJECT-TYPE SYNTAX YesNoStatus ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether or not the device is removable." ::= { dptScsiDevEntry 14 } dptScsiDevEccEnabled OBJECT-TYPE SYNTAX YesNoStatus ACCESS read-only STATUS deprecated DESCRIPTION "Indicates whether the device has ECC enabled or disabled." ::= { dptScsiDevEntry 15 } dptScsiDevScsiVersion OBJECT-TYPE SYNTAX ScsiVersion ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the SCSI specification version of the device." ::= { dptScsiDevEntry 16 } dptScsiDevSoftReset OBJECT-TYPE SYNTAX YesNoStatus ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the device supports soft reset." ::= { dptScsiDevEntry 17 } dptScsiDevCmdQueuing OBJECT-TYPE SYNTAX YesNoStatus ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the device is supports command queuing." ::= { dptScsiDevEntry 18 } dptScsiDevLinkedCmds OBJECT-TYPE SYNTAX YesNoStatus ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the device support linked commands (not applicable to logical devices)." ::= { dptScsiDevEntry 19 } dptScsiDevSynchronous OBJECT-TYPE SYNTAX YesNoStatus ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the device supports synchronous data transfers." ::= { dptScsiDevEntry 20 } dptScsiDevRelAddr OBJECT-TYPE SYNTAX YesNoStatus ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the device supports relative addressing (not applicable to logical devices)." ::= { dptScsiDevEntry 21 } dptScsiDevSMART OBJECT-TYPE SYNTAX YesNoStatus ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the device supports SMART specifications (not applicable to logical devices)." ::= { dptScsiDevEntry 22 } dptScsiDevSCAM OBJECT-TYPE SYNTAX YesNoStatus ACCESS read-only STATUS deprecated DESCRIPTION "Indicates whether the device supports SCAM." ::= { dptScsiDevEntry 23 } dptScsiDevBadBlockNumber OBJECT-TYPE SYNTAX INTEGER (0..'FFFFFFFF'h) ACCESS read-only STATUS mandatory DESCRIPTION "If bad blocks have been detected on the device, this is the address of the most recent one. Otherwise it will contain 0 (no error). The first valid block starts at 1. This object is used in the definition of one or more traps." ::= { dptScsiDevEntry 24 } dptScsiDevBadBlockCount OBJECT-TYPE SYNTAX INTEGER (0..'FFFFFFFF'h) ACCESS read-only STATUS mandatory DESCRIPTION "This represents the total number of the bad blocks encountered most recently on the device starting at the block number dptScsiDevBadBlockNumber. This object is needed in the definition of one or more traps." ::= { dptScsiDevEntry 25 } dptScsiDevErrorsAboveThreshold OBJECT-TYPE SYNTAX YesNoStatus ACCESS read-only STATUS deprecated DESCRIPTION "Indicates whether or not the error count of the device has reached the threshold. This value is no longer supported." ::= { dptScsiDevEntry 26 } dptScsiDevDriveLockingOn OBJECT-TYPE SYNTAX YesNoStatus ACCESS read-only STATUS deprecated DESCRIPTION "Indicates whether or not the drive is locked. This value is no longer supported." ::= { dptScsiDevEntry 27 } dptScsiDevLastReqSenseInfo OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Device Request Sense information. It is used in the definition of one or more traps." ::= { dptScsiDevEntry 28 } dptScsiDevReadCachingOn OBJECT-TYPE SYNTAX YesNoStatus ACCESS read-only STATUS deprecated DESCRIPTION "Indicates whether or not read caching is on. This value is not applicable to SmartRAID V and later controllers." ::= { dptScsiDevEntry 29 } dptScsiDevReadCacheMaxRecord OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "Maximum record size for read caching. This value is not applicable to SmartRAID V and later controllers. For these controllers, this value will be 0." ::= { dptScsiDevEntry 30 } dptScsiDevWriteCachingOn OBJECT-TYPE SYNTAX YesNoStatus ACCESS read-only STATUS deprecated DESCRIPTION "Indicates whether or not write caching is on. This value is not applicable to SmartRAID V and later controllers." ::= { dptScsiDevEntry 31 } dptScsiDevWriteCacheMaxRecord OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "Maximum record size for write caching. This value is not applicable to SmartRAID V and later controllers. For these controllers, this value will be 0." ::= { dptScsiDevEntry 32 } dptScsiDevWriteMode OBJECT-TYPE SYNTAX DeviceWriteMode ACCESS read-only STATUS mandatory DESCRIPTION "The write modes are Write-back and Write-through, with write-back being the default. In write-back mode the controller will cache the data and return completion to the host before the data is written to disk. This is the highest performance mode. In write-through mode the controller will always write the data to disk before posting complete to the host. The data may or may not be placed into the controller's cache." ::= { dptScsiDevEntry 33 } dptScsiDevSmartStatusOk OBJECT-TYPE SYNTAX YesNoStatus ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the device has reported a SMART error not (not applicable to logical devices)." ::= { dptScsiDevEntry 34 } dptScsiDevType OBJECT-TYPE SYNTAX DeviceType ACCESS read-only STATUS mandatory DESCRIPTION "Type of device reported." ::= { dptScsiDevEntry 35 } -- -- dptScsiArr group -- -- This group contains information about the RAID devices. -- -- In case of RAID-0, RAID-1, RAID-5 and redirect, for every -- row in this table, there exists a corresponding row in -- dptScsiDevTable. -- -- Implementation of this group is optional. This group is -- required if the controller is RAID capable. -- dptScsiArrTable OBJECT-TYPE SYNTAX SEQUENCE OF DptScsiArrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of RAID array groups." ::= { dptScsiArr 1 } dptScsiArrEntry OBJECT-TYPE SYNTAX DptScsiArrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "These parameters describe/control a RAID array group." INDEX { dptScsiHbaNumber, dptScsiBusNumber, dptScsiDevId, dptScsiDevLun, dptScsiDevLevel } ::= { dptScsiArrTable 1 } DptScsiArrEntry ::= SEQUENCE { dptScsiArrType RaidType, dptScsiArrOwner SoftwareType, dptScsiArrName DisplayString, dptScsiArrBackgroundProgress INTEGER, dptScsiArrEntryStatus RowStatus } dptScsiArrType OBJECT-TYPE SYNTAX RaidType ACCESS read-only STATUS mandatory DESCRIPTION "The RAID type for the Logical Drive. ------------------------------ RAID Disk-fault No.of Level Tolerant Drives ------------------------------ RAID-0 No 2 or more RAID-1 Yes Even number RAID-5 Yes 3 or more Hot Spare - one Redirected - one" ::= { dptScsiArrEntry 1 } dptScsiArrOwner OBJECT-TYPE SYNTAX SoftwareType ACCESS read-only STATUS mandatory DESCRIPTION "software entity that created this logical device." ::= { dptScsiArrEntry 2 } dptScsiArrName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..17)) ACCESS read-only STATUS mandatory DESCRIPTION "Name of the RAID array group." ::= { dptScsiArrEntry 3 } dptScsiArrBackgroundProgress OBJECT-TYPE SYNTAX INTEGER (0..100) ACCESS read-only STATUS mandatory DESCRIPTION "Percentage of completion of an outstanding background operation, e.g., array Build, Rebuild or Verify. If there is no current background process, the value is 100 by default." ::= { dptScsiArrEntry 4 } dptScsiArrEntryStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "- 'active': indicates that the table row is available for use by the managed device; - 'notInService': indicates that the table row exists in the agent, but is unavailable for use by the managed device (see NOTE below); - 'notReady': indicates that the table row exists in the agent, but is missing information necessary in order to be available for use by the managed device; - 'createAndGo': supplied by a management station wishing to create a new instance of a table row and to have it available for use by the managed device; (cannot be returned in a get response) - 'createAndWait': supplied by a management station wishing to create a new instance of a table row but not to have it available for use by the managed device; and, (cannot be returned in a get response) - 'destroy': supplied by a management station wishing to delete all of the objects associated with an existing table row. (cannot be returned in a get response) To create new row, a manager sets this object to createAndWait. Agent creates a new row and sets row status to notInService. After the manager creates all the corresponding rows in dptScsiArrMemberTable and has set all the relevant columnar objects, it finally sets dptScsiArrEntryStatus to active which saves all the information to the hardware and performs an array build. If the manager sets dptScsiArrEntryStatus to active or notInService and the required number of drives are not members of this array group (for example, a RAID-5 needs at least 3 drives), then 'inconsistentValue' is returned. To delete an array group, the manager sets this object to destroy. When a row with a particular row index is destroyed, all corresponding rows in dptScsiArrMemberTable are destroyed as well. +---------------+ +--------------+ +--------+ | doesn't exist | --> | notInService | --> | active | +---------------+ +--------------+ +--------+ Array group is Array group is Array group is not created created in the saved to hardware agent and a build is performed" ::= { dptScsiArrEntry 5 } dptScsiHbaNumberMember OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS not-accessible STATUS mandatory DESCRIPTION "An index that uniquely identifies a row in the dptHbaTable table that pertain to a particular HBA. The value of this object is the logical device identifier for a DPT adapter. In EISA systems, EISA bus slots are scanned, starting from the lowest slot, looking for DPT adapters. In ISA system, DPT adapters are scanned in order of I/O address. As DPT adapters are found, they are assigned numbers incrementally, starting with 0." ::= { dptScsiDummy 1 } dptScsiBusNumberMember OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS not-accessible STATUS mandatory DESCRIPTION "An index that, along with dptScsHbaNumber uniquely, identifies an entry in the dptScsiBusTable for a particular SCSI Bus." ::= { dptScsiDummy 2 } dptScsiDevIdMember OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS not-accessible STATUS mandatory DESCRIPTION "The SCSI Id of the device." ::= { dptScsiDummy 3 } dptScsiDevLunMember OBJECT-TYPE SYNTAX INTEGER (0..7) ACCESS not-accessible STATUS mandatory DESCRIPTION "The SCSI logical unit number of the device." ::= { dptScsiDummy 4 } dptScsiDevLevelMember OBJECT-TYPE SYNTAX INTEGER (0..2) ACCESS not-accessible STATUS mandatory DESCRIPTION "Indicates whether the device is a physical device (level 0) or a logical device (level 1, level 2, etc). It also gives its level in the containment hierarchy of devices. A device is a logical device if it contains other SCSI devices, otherwise it is a physical device. A level 1 array contains only physical devices as its members; a level 2 device has at least one level 1 array as a member; and so on. In the case of HBA with no RAID capabilities, the only applicable device level is 0." ::= { dptScsiDummy 5 } -- -- This table determines the members of an RAID array. -- dptScsiArrMemberTable OBJECT-TYPE SYNTAX SEQUENCE OF DptScsiArrMemberEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of mappings between an array device and its components." ::= { dptScsiArr 2 } dptScsiArrMemberEntry OBJECT-TYPE SYNTAX DptScsiArrMemberEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "These parameters describe/control the mappings between an array and its components. In the index clause, the first set of indices from dptScsiHbaNumber to dptScsiDevLevel describes the array (parent) and the second set represents the member (child)." INDEX { dptScsiHbaNumber, dptScsiBusNumber, dptScsiDevId, dptScsiDevLun, dptScsiDevLevel, dptScsiHbaNumberMember, dptScsiBusNumberMember, dptScsiDevIdMember, dptScsiDevLunMember, dptScsiDevLevelMember } ::= { dptScsiArrMemberTable 1 } DptScsiArrMemberEntry ::= SEQUENCE { dptScsiArrMemberStripeSize INTEGER, dptScsiArrMemberEntryStatus RowStatus } dptScsiArrMemberStripeSize OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The stripe size used by the array (in KB). A stripe is a contiguous region for data storage on a disk. Data is distributed evenly across component drives in an array by concatenating interleaved stripes from each drive. If stripe size is not applicable to a particular type of RAID (e.g., hot spare), the value is 0." ::= { dptScsiArrMemberEntry 1 } dptScsiArrMemberEntryStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "To create a new row, manager sets this object to createAndWait. After successful creation of a row in the agent, it is set to notInService until the parent array is made active and at that time it is set to active as well. Setting it to createAndGo has the same effect as that of createAndWait. +---------------+ +--------------+ +--------+ | doesn't exist | --> | notInService | --> | active | +---------------+ +--------------+ +--------+ A new row is Array group is created in the saved to hardware agent and a build is performed" ::= { dptScsiArrMemberEntry 2 } -- -- dptScsiStats group -- -- This group contains statistical information about the controllers, -- SCSI devices and arrays. -- -- Implementation of this group is optional. -- -- -- The Host Bus Adapter statistics table. This table holds statistics -- for all controllers. -- dptScsiStatsHbaTable OBJECT-TYPE SYNTAX SEQUENCE OF DptScsiStatsHbaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of controller statistics." ::= { dptScsiStats 1 } dptScsiStatsHbaEntry OBJECT-TYPE SYNTAX DptScsiStatsHbaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "These parameters describe the statistics of an controller." INDEX { dptScsiHbaNumber } ::= { dptScsiStatsHbaTable 1 } DptScsiStatsHbaEntry ::= SEQUENCE { dptScsiStatsHbaCacheTotalPages Gauge, dptScsiStatsHbaCacheUsedPages Gauge, dptScsiStatsHbaCacheDirtyPages Gauge, dptScsiStatsHbaCacheReadAheadPages Gauge, dptScsiStatsHbaCacheLockedPages Gauge, dptScsiStatsHbaCacheEccFaultPages Gauge, dptScsiStatsHbaCommands Counter, dptScsiStatsHbaMisAlignedTransfers Counter, dptScsiStatsHbaScsiResets Counter } dptScsiStatsHbaCacheTotalPages OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the maximum number of data pages that can be cached on the controller. A page is the smallest region of cache that can be allocated to store data. Each page holds one 512-byte disk sector. The value of this object depends on the memory configuration of the controller." ::= { dptScsiStatsHbaEntry 1 } dptScsiStatsHbaCacheUsedPages OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of data pages residing in the cache memory. This has the same value as dptHbaCacheTotalPages when the cache is full." ::= { dptScsiStatsHbaEntry 2 } dptScsiStatsHbaCacheDirtyPages OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of cache pages that contain dirty data. Dirty data is the data which has been written to the adapter by the computer but has not yet been copied to the disk. This object has a value of 0 after the cache is flushed or allowed to write-back during a period of no disk activity." ::= { dptScsiStatsHbaEntry 3 } dptScsiStatsHbaCacheReadAheadPages OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of cache pages that contain read-ahead data. Read-ahead data is read from the drives in anticipation of a future access." ::= { dptScsiStatsHbaEntry 4 } dptScsiStatsHbaCacheLockedPages OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of data pages residing in the cache memory that are presently locked. These data pages do not get paged out until the locks are released." ::= { dptScsiStatsHbaEntry 5 } dptScsiStatsHbaCacheEccFaultPages OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of cache pages that have had Error Correcting Code (ECC) fault and had been reassigned since power up. ECC is a method of generating redundant information that can be used to detect and correct errors in stored or transmitted data. " ::= { dptScsiStatsHbaEntry 6 } dptScsiStatsHbaCommands OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of commands received by the controller since power up." ::= { dptScsiStatsHbaEntry 7 } dptScsiStatsHbaMisAlignedTransfers OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of misaligned data transfers handled by the controller since power up. In a misaligned data transfer, data is accessed on odd byte boundary. These transfers normally take longer to complete than aligned transfers." ::= { dptScsiStatsHbaEntry 8 } dptScsiStatsHbaScsiResets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of SCSI reset commands received by the adapter since power up." ::= { dptScsiStatsHbaEntry 9 } -- -- dptScsiStatsDevTable contains statistical information about SCSI -- devices and RAID devices. -- dptScsiStatsDevTable OBJECT-TYPE SYNTAX SEQUENCE OF DptScsiStatsDevEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of Device statistics." ::= { dptScsiStats 2 } dptScsiStatsDevEntry OBJECT-TYPE SYNTAX DptScsiStatsDevEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "These parameters describe the statistics of a device. The index of this entry is the logical device address of the device. The logical device address consists of four fields: controller number, bus number, device ID, logical unit number and level." INDEX { dptScsiHbaNumber, dptScsiBusNumber, dptScsiDevId, dptScsiDevLun, dptScsiDevLevel } ::= { dptScsiStatsDevTable 1 } DptScsiStatsDevEntry ::= SEQUENCE { dptScsiStatsDevReadTotalSectors Counter, dptScsiStatsDevReadCacheHits Counter, dptScsiStatsDevReadAheadHits Counter, dptScsiStatsDevWriteTotalSectors Counter, dptScsiStatsDevWriteCacheHits Counter, dptScsiStatsDevWriteBacks Counter, dptScsiStatsDevStripesCrosseds Counter } dptScsiStatsDevReadTotalSectors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of sectors read from the device since power up." ::= { dptScsiStatsDevEntry 1 } dptScsiStatsDevReadCacheHits OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of data accesses since power up in which the requested data was found in the cache." ::= { dptScsiStatsDevEntry 2 } dptScsiStatsDevReadAheadHits OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of data accesses since power up in which the requested data was found in the read ahead buffer." ::= { dptScsiStatsDevEntry 3 } dptScsiStatsDevWriteTotalSectors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of sectors written to the device since power up." ::= { dptScsiStatsDevEntry 4 } dptScsiStatsDevWriteCacheHits OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of data writes, since power up, targeted to the device in which the data was written to the cache and not to the disk." ::= { dptScsiStatsDevEntry 5 } dptScsiStatsDevWriteBacks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of data writes to the device since power up in which the data was written from the cache to the disk at a time when the device would otherwise be idle." ::= { dptScsiStatsDevEntry 6 } dptScsiStatsDevStripesCrosseds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of array group accesses that cross stripe boundaries since power up. Only applicable in case of array devices; in other cases, it contains zero." ::= { dptScsiStatsDevEntry 7 } -- -- dptScsiStatsDevRWCmdsTable: this table contains statistics -- related to both "host" read and write commands (i.e., -- commands sent by the host computer targeted to a -- device) as well as "physical" commands (i.e., the actual -- commands sent over the bus and reach the targeted device). -- The following cases explain which statistics are applicable -- in each case. -- -- Controller has cache: (may or may not have a RAID module) -- --------------------- -- If a row in this table represents -- 1. a stand alone physical device (i.e., it is neither an -- RAID array nor a component of an array) then both physical -- and host statistics apply. -- -- 2. an RAID array then only the host statistics apply and there -- are no physical statistics. -- A hot spare is an exception. It has no host statistics -- either, for it is not visible to the host. -- -- 3. a component of an array then only physical statistics apply -- and there are no host statistics. -- A hot spare is an exception. It has no physical statistics -- either, for it is used as a stand by and does not directly -- participate in any RAID array. -- -- Controller has no cache: (and hence cannot have RAID arrays) -- ------------------------ -- 1. The host statistics and the physical statistics are the same. -- dptScsiStatsDevRWCmdsTable OBJECT-TYPE SYNTAX SEQUENCE OF DptScsiStatsDevRWCmdsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A statistical breakdown of read and write commands." ::= { dptScsiStats 3 } dptScsiStatsDevRWCmdsEntry OBJECT-TYPE SYNTAX DptScsiStatsDevRWCmdsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "These parameters describe the statistics of a device. The index is the logical device address of the device. The logical device address consists of: contoller number, bus number, device ID and logical unit number and device level." INDEX { dptScsiHbaNumber, dptScsiBusNumber, dptScsiDevId, dptScsiDevLun, dptScsiDevLevel, dptScsiStatsDevRWCmdsType } ::= { dptScsiStatsDevRWCmdsTable 1 } DptScsiStatsDevRWCmdsEntry ::= SEQUENCE { dptScsiStatsDevRWCmdsType CommandType, dptScsiStatsDevRead1Ks Counter, dptScsiStatsDevRead2Ks Counter, dptScsiStatsDevRead4Ks Counter, dptScsiStatsDevRead8Ks Counter, dptScsiStatsDevRead16Ks Counter, dptScsiStatsDevRead32Ks Counter, dptScsiStatsDevRead64Ks Counter, dptScsiStatsDevRead128Ks Counter, dptScsiStatsDevRead256Ks Counter, dptScsiStatsDevRead512Ks Counter, dptScsiStatsDevRead1MBs Counter, dptScsiStatsDevReadGreater1MBs Counter, dptScsiStatsDevWrite1Ks Counter, dptScsiStatsDevWrite2Ks Counter, dptScsiStatsDevWrite4Ks Counter, dptScsiStatsDevWrite8Ks Counter, dptScsiStatsDevWrite16Ks Counter, dptScsiStatsDevWrite32Ks Counter, dptScsiStatsDevWrite64Ks Counter, dptScsiStatsDevWrite128Ks Counter, dptScsiStatsDevWrite256Ks Counter, dptScsiStatsDevWrite512Ks Counter, dptScsiStatsDevWrite1MBs Counter, dptScsiStatsDevWriteGreater1MBs Counter } dptScsiStatsDevRWCmdsType OBJECT-TYPE SYNTAX CommandType ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether this row represents statistics related to the commands sent by the O/S of the host computer or the SCSI commands sent by the controller to the device to do a physical read or write." ::= { dptScsiStatsDevRWCmdsEntry 1 } dptScsiStatsDevRead1Ks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ScsiDev Group read operations of length <= 1K." ::= { dptScsiStatsDevRWCmdsEntry 2 } dptScsiStatsDevRead2Ks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ScsiDev Group read operations of length > 1K & <= 2K." ::= { dptScsiStatsDevRWCmdsEntry 3 } dptScsiStatsDevRead4Ks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ScsiDev Group read operations of length > 2K & <= 4K." ::= { dptScsiStatsDevRWCmdsEntry 4 } dptScsiStatsDevRead8Ks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ScsiDev Group read operations of length > 4K & <= 8K." ::= { dptScsiStatsDevRWCmdsEntry 5 } dptScsiStatsDevRead16Ks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ScsiDev Group read operations of length > 8K <= 16K." ::= { dptScsiStatsDevRWCmdsEntry 6 } dptScsiStatsDevRead32Ks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ScsiDev Group read operations of length > 16K & <= 32K." ::= { dptScsiStatsDevRWCmdsEntry 7 } dptScsiStatsDevRead64Ks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ScsiDev Group read operations of length > 32K & <= 64k." ::= { dptScsiStatsDevRWCmdsEntry 8 } dptScsiStatsDevRead128Ks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ScsiDev Group read operations of length > 64K & <= 128K." ::= { dptScsiStatsDevRWCmdsEntry 9 } dptScsiStatsDevRead256Ks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ScsiDev Group read operations of length > 128K & <= 256K." ::= { dptScsiStatsDevRWCmdsEntry 10 } dptScsiStatsDevRead512Ks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ScsiDev Group read operations of length > 256K & <= 512K." ::= { dptScsiStatsDevRWCmdsEntry 11 } dptScsiStatsDevRead1MBs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ScsiDev Group read operations of length > 512K & <= 1M." ::= { dptScsiStatsDevRWCmdsEntry 12 } dptScsiStatsDevReadGreater1MBs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ScsiDev Group read operations of length > 1M." ::= { dptScsiStatsDevRWCmdsEntry 13 } dptScsiStatsDevWrite1Ks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ScsiDev Group write operations of length <= 1K." ::= { dptScsiStatsDevRWCmdsEntry 14 } dptScsiStatsDevWrite2Ks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ScsiDev Group write operations of length > 1K & <= 2K." ::= { dptScsiStatsDevRWCmdsEntry 15 } dptScsiStatsDevWrite4Ks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ScsiDev Group write operations of length > 2K & <= 4K." ::= { dptScsiStatsDevRWCmdsEntry 16 } dptScsiStatsDevWrite8Ks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ScsiDev Group write operations of length > 4k & <= 8K." ::= { dptScsiStatsDevRWCmdsEntry 17 } dptScsiStatsDevWrite16Ks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ScsiDev Group write operations of length > 8K & <= 16K." ::= { dptScsiStatsDevRWCmdsEntry 18 } dptScsiStatsDevWrite32Ks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ScsiDev Group write operations of length > 16K & <= 32K." ::= { dptScsiStatsDevRWCmdsEntry 19 } dptScsiStatsDevWrite64Ks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ScsiDev Group write operations of length > 32K & <= 64K." ::= { dptScsiStatsDevRWCmdsEntry 20 } dptScsiStatsDevWrite128Ks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ScsiDev Group write operations of length > 64K & <= 128K." ::= { dptScsiStatsDevRWCmdsEntry 21 } dptScsiStatsDevWrite256Ks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ScsiDev Group write operations of length > 128K & <= 256K." ::= { dptScsiStatsDevRWCmdsEntry 22 } dptScsiStatsDevWrite512Ks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ScsiDev Group write operations of length > 256K & <= 512K." ::= { dptScsiStatsDevRWCmdsEntry 23 } dptScsiStatsDevWrite1MBs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ScsiDev Group write operations of length > 512K & <= 1M." ::= { dptScsiStatsDevRWCmdsEntry 24 } dptScsiStatsDevWriteGreater1MBs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ScsiDev Group write operations of length > 1M." ::= { dptScsiStatsDevRWCmdsEntry 25 } -- -- Event Group -- -- This group contains objects that are specifically for the -- purpose of defining one or more traps. -- -- Implementation of this group is optional. -- dptScsiEventInfo OBJECT-TYPE SYNTAX DisplayString (SIZE (0..256)) ACCESS read-only STATUS mandatory DESCRIPTION "Represents information in a human readable form (English string) for generic DPT SCSI system traps." ::= { dptScsiEvent 1 } dptScsiEventAuxVoltage OBJECT-TYPE SYNTAX LowHighStatus ACCESS not-accessible STATUS mandatory DESCRIPTION "Auxiliary voltage status reported by the controller." ::= { dptScsiEvent 2 } -- -- DPT enterprise trap definitions -- The trap notation uses the Novell description standard -- -- Traps are grouped into the following severity levels: -- Severity trap range -- Unknown 0..99 -- Informational 100..199 -- Minor 200..299 -- Major 300..399 -- Critical 400..499 -- dptHbaTemperatureVeryHighTrap TRAP-TYPE ENTERPRISE dpt VARIABLES { dptScsiHbaTemperature, dptScsiHbaNumber } DESCRIPTION "Very high temperature detected on controller." --Internal events: 0x18 --#TYPE "Very high temperature on controller" --#SUMMARY "Very high temperature on controller %d" --#ARGUMENTS {1} --#SEVERITY CRITICAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 400 dptArrayStatusChangeFailedTrap TRAP-TYPE ENTERPRISE dpt VARIABLES { dptScsiDevStatus, dptScsiHbaNumber, dptScsiBusNumber, dptScsiDevId, dptScsiDevLun, dptScsiDevLevel } DESCRIPTION "Array Failed due to multiple drive failures." --Internal events: 0x0B w/ sub-codes in event. --#TYPE "Array failed" --#SUMMARY "Array failed on Controller %d Bus %d ID %d LUN %d." --#ARGUMENTS {1,2,3,4} --#SEVERITY CRITICAL --#TIMEINDEX 99 --#STATE NONOPERATIONAL ::= 401 dptHbaVoltageChangeTrap TRAP-TYPE ENTERPRISE dpt VARIABLES { dptScsiHbaVoltage, dptScsiHbaNumber } DESCRIPTION "Controller detected 5V voltage is outside of the normal range." --Internal events: 0x13, 0x15 --#TYPE "5V Voltage outside range on controller" --#SUMMARY "5V Voltage status is now %d on controller %d" --#ARGUMENTS {0,1} --#SEVERITY MAJOR --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 300 dptHbaTemperatureHighTrap TRAP-TYPE ENTERPRISE dpt VARIABLES { dptScsiHbaTemperature, dptScsiHbaNumber } DESCRIPTION "High temperature detected on controller." --Internal events: 0x17 --#TYPE "High temperature on controller" --#SUMMARY "High temperature on controller %d" --#ARGUMENTS {1} --#SEVERITY MINOR --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 301 dptHbaEccRAMErrorUncorrectableTrap TRAP-TYPE ENTERPRISE dpt VARIABLES { dptScsiHbaBadMemoryAddress, dptScsiHbaNumber } DESCRIPTION "The controller detected and uncorrectable ECC RAM error. dptScsiHbaBadMemoryAddress contains the RAM address." --Internal events: 0x3007 --#TYPE "Controller detected an ECC RAM error that could not be corrected" --#SUMMARY "Uncorrectable ECC error found on controller %d" --#ARGUMENTS {1} --#SEVERITY MAJOR --#TIMEINDEX 99 --#STATE NONOPERATIONAL ::= 302 dptArrayStatusChangeDegradedTrap TRAP-TYPE ENTERPRISE dpt VARIABLES { dptScsiDevStatus, dptScsiHbaNumber, dptScsiBusNumber, dptScsiDevId, dptScsiDevLun, dptScsiDevLevel } DESCRIPTION "Array Degraded due to drive failure." --Internal events: 0x0B w/ sub-codes in event. --#TYPE "Array degraded" --#SUMMARY "Array on Controller %d Bus %d ID %d LUN %d running degraded." --#ARGUMENTS {1,2,3,4} --#SEVERITY MAJOR --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 303 dptDevReqSenseSeriousErrorTrap TRAP-TYPE ENTERPRISE dpt VARIABLES { dptScsiDevLastReqSenseInfo, dptScsiHbaNumber, dptScsiBusNumber, dptScsiDevId, dptScsiDevLun, dptScsiDevLevel } DESCRIPTION "Serious: request sense information from controller." --Internal events: 0x3004 --#TYPE "Serious: Request sense data received." --#SUMMARY "Serious: Request sense data for controller %d Bus %d ID %d LUN %d." --#ARGUMENTS {1,2,3,4} --#SEVERITY MAJOR --#TIMEINDEX 99 --#STATE NONOPERATIONAL ::= 304 dptDevArrayDataInconsistencyTrap TRAP-TYPE ENTERPRISE dpt VARIABLES { dptScsiDevBadBlockNumber, dptScsiDevBadBlockCount, dptScsiHbaNumber, dptScsiBusNumber, dptScsiDevId, dptScsiDevLun, dptScsiDevLevel } DESCRIPTION "Array Data consistency error detected on controller." --Internal events: 0x300C --#TYPE "Array data inconsistency found." --#SUMMARY "Array Data Inconsistency: Controller %d Bus %d ID %d LUN %d." --#ARGUMENTS {2,3,4,5} --#SEVERITY MAJOR --#TIMEINDEX 99 --#STATE DEGRADED ::= 305 dptHbaErrorTrap TRAP-TYPE ENTERPRISE dpt VARIABLES { dptScsiHbaNumber } DESCRIPTION "The controller has detected a non-SCSI related error, as defined in the I2O spec." --Internal events: 0x3005 --#TYPE "controller error found." --#SUMMARY "controller %d reported a non-SCSI related error." --#ARGUMENTS {0} --#SEVERITY MAJOR --#TIMEINDEX 99 --#STATE DEGRADED ::= 306 dptDevFailedTrap TRAP-TYPE ENTERPRISE dpt VARIABLES { dptScsiHbaNumber, dptScsiBusNumber, dptScsiDevId, dptScsiDevLun, dptScsiDevLevel } DESCRIPTION "An unprotected drive has failed (visible to the OS)." --Internal events: 0x4012 --#TYPE "Unprotected drive has failed." --#SUMMARY "Drive failure on controller %d Bus %d ID %d LUN %d." --#ARGUMENTS {0,1,2,3} --#SEVERITY MAJOR --#TIMEINDEX 99 --#STATE DEGRADED ::= 307 dptDevSmartFailedTrap TRAP-TYPE ENTERPRISE dpt VARIABLES { dptScsiHbaNumber, dptScsiBusNumber, dptScsiDevId, dptScsiDevLun, dptScsiDevLevel } DESCRIPTION "A drive has reported a SMART failure." --Internal events: 0x401B --#TYPE "SMART failure reported." --#SUMMARY "SMART failure on controller %d Bus %d ID %d LUN %d reported." --#ARGUMENTS {0,1,2,3} --#SEVERITY MAJOR --#TIMEINDEX 99 --#STATE DEGRADED ::= 308 dptHbaAuxVoltageChangeTrap TRAP-TYPE ENTERPRISE dpt VARIABLES { dptScsiEventAuxVoltage, dptScsiHbaNumber } DESCRIPTION "Controller detected an auxiliary voltage is outside of the normal range." --Internal events: 0x33, 0x35, 0x36, 0x38, 0x39, 0x3B, 0x46, 0x48, -- 0x49, 0x4B, 0x4C, 0x4E --#TYPE "Auxiliary voltage outside range on controller" --#SUMMARY "An auxiliary voltage status is now %d on controller %d" --#ARGUMENTS {0,1} --#SEVERITY MAJOR --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 309 dptHbaEccRAMErrorCorrectedTrap TRAP-TYPE ENTERPRISE dpt VARIABLES { dptScsiHbaBadMemoryAddress, dptScsiHbaNumber } DESCRIPTION "The controller detected and corrected an ECC RAM error. dptScsiHbaBadMemoryAddress contains the RAM address." --Internal events: 0x2007 --#TYPE "ECC RAM Error detected and corrected." --#SUMMARY "Correctable ECC RAM Error detected on controller %d" --#ARGUMENTS {1} --#SEVERITY MINOR --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 200 dptDevBlockReassignedTrap TRAP-TYPE ENTERPRISE dpt VARIABLES { dptScsiDevBadBlockNumber, dptScsiHbaNumber, dptScsiBusNumber, dptScsiDevId, dptScsiDevLun, dptScsiDevLevel } DESCRIPTION "Controller reassigned a block. dptScsiDevBadBlockNumber contains the reassigned block number." --Internal events: 0x0006 --#TYPE "Disk block was reassigned" --#SUMMARY "Block %d reassigned: Controller %d Bus %d ID %d LUN %d" --#ARGUMENTS {0,1,2,3,4} --#SEVERITY MINOR --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 201 dptDevReqSenseErrorTrap TRAP-TYPE ENTERPRISE dpt VARIABLES { dptScsiDevLastReqSenseInfo, dptScsiHbaNumber, dptScsiBusNumber, dptScsiDevId, dptScsiDevLun, dptScsiDevLevel } DESCRIPTION "Warning: request sense information from controller." --Internal events: 0x2004 --#TYPE "Warning: request sense data received." --#SUMMARY "Warning: Request sense data for controller %d Bus %d ID %d LUN %d." --#ARGUMENTS {1,2,3,4} --#SEVERITY MINOR --#TIMEINDEX 99 --#STATE DEGRADED ::= 202 dptHbaVoltageNormalTrap TRAP-TYPE ENTERPRISE dpt VARIABLES { dptScsiHbaVoltage, dptScsiHbaNumber } DESCRIPTION "5V Voltage has returned to the normal range." --Internal events: 0x14 --#TYPE "Normal 5V voltage on controller" --#SUMMARY "Normal 5V voltage restored on controller %d" --#ARGUMENTS {1} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 100 dptHbaTemperatureNormalTrap TRAP-TYPE ENTERPRISE dpt VARIABLES { dptScsiHbaTemperature, dptScsiHbaNumber } DESCRIPTION "Temperature on controller has returned to normal range." --Internal events: 0x16 --#TYPE "Normal temperature on controller " --#SUMMARY "Normal temperature restored on controller %d" --#ARGUMENTS {1} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 101 dptHbaEccRAMErrorNotFoundTrap TRAP-TYPE ENTERPRISE dpt VARIABLES { dptScsiHbaBadMemoryAddress, dptScsiHbaNumber } DESCRIPTION "Controller detected an ECC RAM Error but an ECC error was not found when correction was attempted." --Internal events: 0x1007 --#TYPE "ECC RAM Error detected but not found on correction." --#SUMMARY "ECC RAM Error detected at %d on controller %d, but not found." --#ARGUMENTS {0,1} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 102 dptDevStatusChangedTrap TRAP-TYPE ENTERPRISE dpt VARIABLES { dptScsiDevStatus, dptScsiHbaNumber, dptScsiBusNumber, dptScsiDevId, dptScsiDevLun, dptScsiDevLevel } DESCRIPTION "Status of the device changed." --Internal events: 0x0B w/ sub-codes in event. --#TYPE "Device status change" --#SUMMARY "Device status on Controller %d Bus %d ID %d LUN %d : %d." --#ARGUMENTS {1,2,3,4,0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 103 dptDevReqSenseTrap TRAP-TYPE ENTERPRISE dpt VARIABLES { dptScsiDevLastReqSenseInfo, dptScsiHbaNumber, dptScsiBusNumber, dptScsiDevId, dptScsiDevLun, dptScsiDevLevel } DESCRIPTION "Request sense information received from controller." --Internal events: 0x0004 --#TYPE "Request sense received from controller." --#SUMMARY "Request sense data for controller %d Bus %d ID %d LUN %d." --#ARGUMENTS {1,2,3,4} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 104 dptArrayChangeTrap TRAP-TYPE ENTERPRISE dpt VARIABLES { dptScsiHbaNumber, dptScsiBusNumber, dptScsiDevId, dptScsiDevLun, dptScsiDevLevel } DESCRIPTION "The software has asked the FW to do an array change." --Internal events: 0x0009 --#TYPE "Array change." --#SUMMARY "Array change on controller %d ID %d LUN %d." --#ARGUMENTS {0,1,2,3} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OERATIONAL ::= 105 dptBatteryChangeTrap TRAP-TYPE ENTERPRISE dpt VARIABLES { dptScsiHbaNumber, dptScsiHbaBatteryStatus } DESCRIPTION "The status of the recharchable battery has changed." --Internal events: 0x4043 --#TYPE "Battery status change." --#SUMMARY "Battery status is now %d on controller %d." --#ARGUMENTS {1,0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OERATIONAL ::= 106 dptHbaAuxVoltageNormalTrap TRAP-TYPE ENTERPRISE dpt VARIABLES { dptScsiEventAuxVoltage, dptScsiHbaNumber } DESCRIPTION "An auxiliary voltage has returned to the normal range." --Internal events: 0x34, 0x37, 0x3A, 0x47, 0x4A, 0x4D --#TYPE "Normal auxiliary voltage on controller" --#SUMMARY "Normal auxiliary voltage restored on controller %d" --#ARGUMENTS {1} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 107 dptOtherTrap TRAP-TYPE ENTERPRISE dpt VARIABLES { dptScsiEventInfo } DESCRIPTION "Controller event generated with a value dptScsiEventInfo." --Internal events: all remaining codes --#TYPE "Controller generated an event" --#SUMMARY "Controller generated event: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 14 END