DPT-SCSI-MIB :: dptScsiArrMemberEntryStatus

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DPT-SCSI-MIB › dptScsiArrMemberEntryStatus

dptScsiArrMemberEntryStatus

Module: DPT-SCSI-MIB

OID (symbolic): DPT-SCSI-MIB::dptScsiArrMemberEntryStatus

OID (numeric): 1.3.6.1.4.1.1597.1.5.2.1.2

Node type: OBJECT-TYPE

Type: RowStatus

Access: read-only

Description: To create a new row, manager sets this object to
createAndWait. After successful creation of a row
in the agent, it is set to notInService until the
parent array is made active and at that time it
is set to active as well.

Setting it to createAndGo has the same effect as
that of createAndWait.

+---------------+     +--------------+     +--------+
| doesn't exist | --> | notInService | --> | active |
+---------------+     +--------------+     +--------+
                      A new row is         Array group is
                      created in the       saved to hardware
                      agent                and a build is
                                           performed

What is dptScsiArrMemberEntryStatus?

The SNMP row-status object for a member's row in the array-membership table: set to createAndWait to add a member, after which it goes notInService until the parent array is activated, then becomes active. Used when assembling the drive list for a new RAID array.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1597.1.5.2.1.2
snmpwalk -v2c -c public <target> DPT-SCSI-MIB::dptScsiArrMemberEntryStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1597.1.5.2.1.2.1
snmpget -v2c -c public <target> DPT-SCSI-MIB::dptScsiArrMemberEntryStatus.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> dptScsiArrMemberEntryStatus.1

Start monitoring DPT (Adaptec) SCSI host-bus-adapter with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DPT-SCSI-MIB::dptScsiArrMemberEntryStatus OID value, configure state conditions and alerts, and monitor any DPT (Adaptec) SCSI host-bus-adapter from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1597dptDPT-SCSI-MIB
1.3.6.1.4.1.1597.1dptScsiDPT-SCSI-MIB
1.3.6.1.4.1.1597.1.5dptScsiArrDPT-SCSI-MIB
1.3.6.1.4.1.1597.1.5.2dptScsiArrMemberTableDPT-SCSI-MIB
1.3.6.1.4.1.1597.1.5.2.1dptScsiArrMemberEntryDPT-SCSI-MIB
1.3.6.1.4.1.1597.1.5.2.1.2dptScsiArrMemberEntryStatusDPT-SCSI-MIB