DOT5-PHYS-MIB :: dot5PhysMgmtPortRingPortMediaSelect

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsDOT5-PHYS-MIBdot5PhysMgmtPortRingPortMediaSelect

dot5PhysMgmtPortRingPortMediaSelect

Module: DOT5-PHYS-MIB

OID (symbolic): DOT5-PHYS-MIB::dot5PhysMgmtPortRingPortMediaSelect

OID (numeric): 1.3.6.1.4.1.52.4.1.1.6.1.3.3.1.1.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: When written, this object allows for the selection of the media type for this token ring ring ring port, provided the MIM on which this port is resident falls within the domain of the device. If the MIM falls outside of the domain of the device, the SNMP error BadValue will be returned. If the ring port is not selectable and an attempt is made to change the media type, a BadValue error will be returned. When read, this object will return the last selection made unless it is unselectable, in which case noSelection is returned.

What is dot5PhysMgmtPortRingPortMediaSelect?

Selects the physical media type (shielded twisted pair or fiber) used by this ring port, where the port supports media selection. An admin sets this when re-cabling a ring segment from copper to fiber or vice versa.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.6.1.3.3.1.1.4
snmpwalk -v2c -c public <target> DOT5-PHYS-MIB::dot5PhysMgmtPortRingPortMediaSelect

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.6.1.3.3.1.1.4.1
snmpget -v2c -c public <target> DOT5-PHYS-MIB::dot5PhysMgmtPortRingPortMediaSelect.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.1.1.6.1.3.3.1.1.4.1 i <value>

Start monitoring Cabletron Systems Token Ring hub/MAU (physical-layer port config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOT5-PHYS-MIB::dot5PhysMgmtPortRingPortMediaSelect OID value, configure state conditions and alerts, and monitor any Cabletron Systems Token Ring hub/MAU (physical-layer port config) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.52cabletronCabletron-MIB
1.3.6.1.4.1.52.4mibsCTRON-AP3000-MIB
1.3.6.1.4.1.52.4.1ctronCTRON-MIB-NAMES
1.3.6.1.4.1.52.4.1.1ctPhysicalCTRON-MIB-NAMES
1.3.6.1.4.1.52.4.1.1.6ctDot5PhysMgmtCTRON-MIB-NAMES
Numeric OIDNameModule
1.3.6.1.4.1.52.4.1.1.6.1dot5PhysMgmtRev1DOT5-PHYS-MIB
1.3.6.1.4.1.52.4.1.1.6.1.3dot5PhysMgmtPortDOT5-PHYS-MIB
1.3.6.1.4.1.52.4.1.1.6.1.3.3dot5PhysMgmtPortRingDOT5-PHYS-MIB
1.3.6.1.4.1.52.4.1.1.6.1.3.3.1dot5PhysMgmtPortRingTableDOT5-PHYS-MIB
1.3.6.1.4.1.52.4.1.1.6.1.3.3.1.1dot5PhysMgmtPortRingEntryDOT5-PHYS-MIB
1.3.6.1.4.1.52.4.1.1.6.1.3.3.1.1.4dot5PhysMgmtPortRingPortMediaSelectDOT5-PHYS-MIB