All MIBs › DOT5-PHYS-MIB › dot5PhysMgmtPortRingPhantomCurrent
dot5PhysMgmtPortRingPhantomCurrent
Module: DOT5-PHYS-MIB
OID (symbolic): DOT5-PHYS-MIB::dot5PhysMgmtPortRingPhantomCurrent
OID (numeric): 1.3.6.1.4.1.52.4.1.1.6.1.3.3.1.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: When written, this object activates or deactivates the MIM board's phantom current for this ring port, if applicable and provided the MIM on which this port is resident falls within the domain of the device. If the port does not support phantom drive, or if the MIM falls outside of the domain of the device, the SNMP error BadValue will be returned. If successfully written, this selection may be different than the HW switch setting. When read, this object reports the state of the ring port's phantom drive status, whether enabled, disabled, or not supported.
What is dot5PhysMgmtPortRingPhantomCurrent?
Activates or deactivates the MIM board's phantom current drive for this ring port, where supported and within the device's domain. An admin toggles this to control whether the port supplies phantom power used to detect station insertion, potentially overriding the hardware switch setting.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.6.1.3.3.1.1.7 snmpwalk -v2c -c public <target> DOT5-PHYS-MIB::dot5PhysMgmtPortRingPhantomCurrent
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.6.1.3.3.1.1.7.1 snmpget -v2c -c public <target> DOT5-PHYS-MIB::dot5PhysMgmtPortRingPhantomCurrent.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.1.1.6.1.3.3.1.1.7.1 i <value>
Start monitoring Cabletron Systems Token Ring hub/MAU (physical-layer port config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOT5-PHYS-MIB::dot5PhysMgmtPortRingPhantomCurrent OID value, configure state conditions and alerts, and monitor any Cabletron Systems Token Ring hub/MAU (physical-layer port config) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.4 | mibs | CTRON-AP3000-MIB |
| 1.3.6.1.4.1.52.4.1 | ctron | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.1 | ctPhysical | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.1.6 | ctDot5PhysMgmt | CTRON-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4.1.1.6.1 | dot5PhysMgmtRev1 | DOT5-PHYS-MIB |
| 1.3.6.1.4.1.52.4.1.1.6.1.3 | dot5PhysMgmtPort | DOT5-PHYS-MIB |
| 1.3.6.1.4.1.52.4.1.1.6.1.3.3 | dot5PhysMgmtPortRing | DOT5-PHYS-MIB |
| 1.3.6.1.4.1.52.4.1.1.6.1.3.3.1 | dot5PhysMgmtPortRingTable | DOT5-PHYS-MIB |
| 1.3.6.1.4.1.52.4.1.1.6.1.3.3.1.1 | dot5PhysMgmtPortRingEntry | DOT5-PHYS-MIB |
| 1.3.6.1.4.1.52.4.1.1.6.1.3.3.1.1.7 | dot5PhysMgmtPortRingPhantomCurrent | DOT5-PHYS-MIB |