All MIBs › DOT5-PHYS-MIB › dot5PhysMgmtDeviceRingPortsEnable
dot5PhysMgmtDeviceRingPortsEnable
Module: DOT5-PHYS-MIB
OID (symbolic): DOT5-PHYS-MIB::dot5PhysMgmtDeviceRingPortsEnable
OID (numeric): 1.3.6.1.4.1.52.4.1.1.6.1.1.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Setting this object to enable will cause all the token ring ring in/ring out ports residing within the domain of this device to be enabled. Setting this object to noEnable will have no effect. When read this object will always return noEnable.
What is dot5PhysMgmtDeviceRingPortsEnable?
When set to enable, administratively enables every ring-in/ring-out port in this device's domain at once; noEnable has no effect and reads always return noEnable. An admin uses this as a bulk switch when bringing up ring interconnects.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.6.1.1.10 snmpwalk -v2c -c public <target> DOT5-PHYS-MIB::dot5PhysMgmtDeviceRingPortsEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.6.1.1.10.1 snmpget -v2c -c public <target> DOT5-PHYS-MIB::dot5PhysMgmtDeviceRingPortsEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.1.1.6.1.1.10.1 i <value>
Start monitoring Cabletron Systems Token Ring hub/MAU (physical-layer port config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOT5-PHYS-MIB::dot5PhysMgmtDeviceRingPortsEnable OID value, configure state conditions and alerts, and monitor any Cabletron Systems Token Ring hub/MAU (physical-layer port config) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.4 | mibs | CTRON-AP3000-MIB |
| 1.3.6.1.4.1.52.4.1 | ctron | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.1 | ctPhysical | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.1.6 | ctDot5PhysMgmt | CTRON-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4.1.1.6.1 | dot5PhysMgmtRev1 | DOT5-PHYS-MIB |
| 1.3.6.1.4.1.52.4.1.1.6.1.1 | dot5PhysMgmtDevice | DOT5-PHYS-MIB |
| 1.3.6.1.4.1.52.4.1.1.6.1.1.10 | dot5PhysMgmtDeviceRingPortsEnable | DOT5-PHYS-MIB |