All MIBs › DOT5-LOG-MIB › tRingPortRingPhantomCurrent
tRingPortRingPhantomCurrent
Module: DOT5-LOG-MIB
OID (symbolic): DOT5-LOG-MIB::tRingPortRingPhantomCurrent
OID (numeric): 1.3.6.1.4.1.52.4.1.2.1.1.3.3.1.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: When written with the value activatePhantom, this object activates the board's phantom current for the ring port, if applicable. This may be different from the HW switch setting. When written with the value deactivatePhantom, the board removes phantom current for this port, if applicable. This may be different from the HW switch setting. If the port does not support phantom drive, any write to this object will return a BADSETINFO error. When read, this object reports the state of the ring port's phantom drive status, whether enabled, disabled, or not supported.
What is tRingPortRingPhantomCurrent?
Writing activatePhantom(2) or deactivatePhantom(3) turns this ring port's phantom current on or off in software, overriding the board's hardware switch setting where supported; writing to a port without phantom-drive support returns BADSETINFO. Reading it reports the port's current phantom-drive state (enabled, disabled, or noPhantomAvailable(1) if unsupported).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.2.1.1.3.3.1.1.7 snmpwalk -v2c -c public <target> DOT5-LOG-MIB::tRingPortRingPhantomCurrent
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.2.1.1.3.3.1.1.7.1 snmpget -v2c -c public <target> DOT5-LOG-MIB::tRingPortRingPhantomCurrent.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.1.2.1.1.3.3.1.1.7.1 i <value>
Start monitoring Cabletron Systems Token Ring hub/MAU (ring management/logging) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOT5-LOG-MIB::tRingPortRingPhantomCurrent OID value, configure state conditions and alerts, and monitor any Cabletron Systems Token Ring hub/MAU (ring management/logging) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.4 | mibs | CT-PRIORITY-QUEUING |
| 1.3.6.1.4.1.52.4.1 | ctron | CTRON-ISDN-CONFIGURATION-MIB |
| 1.3.6.1.4.1.52.4.1.2 | ctDataLink | CTRON-ISDN-CONFIGURATION-MIB |
| 1.3.6.1.4.1.52.4.1.2.1 | dot5 | CTRON-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4.1.2.1.1 | dot5Rev1 | DOT5-LOG-MIB |
| 1.3.6.1.4.1.52.4.1.2.1.1.3 | tRingPort | DOT5-LOG-MIB |
| 1.3.6.1.4.1.52.4.1.2.1.1.3.3 | tRingPortRing | DOT5-LOG-MIB |
| 1.3.6.1.4.1.52.4.1.2.1.1.3.3.1 | tRingPortRingTable | DOT5-LOG-MIB |
| 1.3.6.1.4.1.52.4.1.2.1.1.3.3.1.1 | tRingPortRingEntry | DOT5-LOG-MIB |
| 1.3.6.1.4.1.52.4.1.2.1.1.3.3.1.1.7 | tRingPortRingPhantomCurrent | DOT5-LOG-MIB |