DOT5-LOG-MIB :: tRingMgmtBcnRecRingPortRetryDelay

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DOT5-LOG-MIB › tRingMgmtBcnRecRingPortRetryDelay

tRingMgmtBcnRecRingPortRetryDelay

Module: DOT5-LOG-MIB

OID (symbolic): DOT5-LOG-MIB::tRingMgmtBcnRecRingPortRetryDelay

OID (numeric): 1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.15

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object defines the time delay between disabling a token ring ring port due to beaconing and re-enabling the port to check the state of the ring port. Setting this object to zero disables retry queue. Non-zero value is delay in seconds. Some products have resolutions that will round this value (in seconds) to the nearest multiple of 7 seconds.

Default of object is product dependent. Refer to individual product documentation.

What is tRingMgmtBcnRecRingPortRetryDelay?

This sets the delay, in seconds, between when a ring (trunk) port is disabled for causing beaconing and when it's re-enabled to test if the fault has cleared; setting it to zero disables the retry queue entirely, and some products round the value to the nearest 7 seconds. A longer delay gives a marginal cable or connection more time to settle before the device tries the port again.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.15
snmpwalk -v2c -c public <target> DOT5-LOG-MIB::tRingMgmtBcnRecRingPortRetryDelay

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.15.1
snmpget -v2c -c public <target> DOT5-LOG-MIB::tRingMgmtBcnRecRingPortRetryDelay.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.15.1 i <value>

Start monitoring Cabletron Systems Token Ring hub/MAU (ring management/logging) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOT5-LOG-MIB::tRingMgmtBcnRecRingPortRetryDelay OID value, configure state conditions and alerts, and monitor any Cabletron Systems Token Ring hub/MAU (ring management/logging) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.52cabletronCabletron-MIB
1.3.6.1.4.1.52.4mibsCT-PRIORITY-QUEUING
1.3.6.1.4.1.52.4.1ctronCTRON-ISDN-CONFIGURATION-MIB
1.3.6.1.4.1.52.4.1.2ctDataLinkCTRON-ISDN-CONFIGURATION-MIB
1.3.6.1.4.1.52.4.1.2.1dot5CTRON-MIB-NAMES
Numeric OIDNameModule
1.3.6.1.4.1.52.4.1.2.1.1dot5Rev1DOT5-LOG-MIB
1.3.6.1.4.1.52.4.1.2.1.1.1tRingDOT5-LOG-MIB
1.3.6.1.4.1.52.4.1.2.1.1.1.1tRingMgmtDOT5-LOG-MIB
1.3.6.1.4.1.52.4.1.2.1.1.1.1.1tRingMgmtRingDOT5-LOG-MIB
1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.15tRingMgmtBcnRecRingPortRetryDelayDOT5-LOG-MIB