All MIBs › DOT5-LOG-MIB › tRingMgmtBcnRecRingPortRetryCount
tRingMgmtBcnRecRingPortRetryCount
Module: DOT5-LOG-MIB
OID (symbolic): DOT5-LOG-MIB::tRingMgmtBcnRecRingPortRetryCount
OID (numeric): 1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.14
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object defines the number of times a token ring ring port will be re-enabled after it has been determined that the port is causing the ring to beacon. Values other than 0-100 and 999 will result in MIB bad value.
Default of object is product dependent. Refer to individual product documentation.
Valid integer values are defined as: 0 ...disable ring port retries 1 - 100 ...retry ring port n times 999 ... retry ring port infinite times
What is tRingMgmtBcnRecRingPortRetryCount?
This sets how many times a ring port will be automatically re-enabled after being identified as the cause of ring beaconing, before the device gives up on it: 0 disables retries, 1-100 sets a finite retry count, and 999 means retry indefinitely. An admin might set this low (e.g. 3-5) on a port with a flaky cable to stop it from repeatedly disrupting the ring, or leave it at the product's default otherwise.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.14 snmpwalk -v2c -c public <target> DOT5-LOG-MIB::tRingMgmtBcnRecRingPortRetryCount
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.14.1 snmpget -v2c -c public <target> DOT5-LOG-MIB::tRingMgmtBcnRecRingPortRetryCount.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.14.1 i <value>
Start monitoring Cabletron Systems Token Ring hub/MAU (ring management/logging) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOT5-LOG-MIB::tRingMgmtBcnRecRingPortRetryCount OID value, configure state conditions and alerts, and monitor any Cabletron Systems Token Ring hub/MAU (ring management/logging) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.4 | mibs | CT-PRIORITY-QUEUING |
| 1.3.6.1.4.1.52.4.1 | ctron | CTRON-ISDN-CONFIGURATION-MIB |
| 1.3.6.1.4.1.52.4.1.2 | ctDataLink | CTRON-ISDN-CONFIGURATION-MIB |
| 1.3.6.1.4.1.52.4.1.2.1 | dot5 | CTRON-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4.1.2.1.1 | dot5Rev1 | DOT5-LOG-MIB |
| 1.3.6.1.4.1.52.4.1.2.1.1.1 | tRing | DOT5-LOG-MIB |
| 1.3.6.1.4.1.52.4.1.2.1.1.1.1 | tRingMgmt | DOT5-LOG-MIB |
| 1.3.6.1.4.1.52.4.1.2.1.1.1.1.1 | tRingMgmtRing | DOT5-LOG-MIB |
| 1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.14 | tRingMgmtBcnRecRingPortRetryCount | DOT5-LOG-MIB |