DOT5-LOG-MIB :: tRingMgmtBcnRecBrdBypassRetryCount

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DOT5-LOG-MIB › tRingMgmtBcnRecBrdBypassRetryCount

tRingMgmtBcnRecBrdBypassRetryCount

Module: DOT5-LOG-MIB

OID (symbolic): DOT5-LOG-MIB::tRingMgmtBcnRecBrdBypassRetryCount

OID (numeric): 1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.18

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object defines the number of times a token ring MIM board, having been bypassed by beacon recovery, will be un-bypassed to determine if the MIM board is causing the ring to beacon. Values other than 0-100 and 999 will result in MIB bad value. Valid integer values are defined as: 0 ...disable MIM bypass retries 1 - 100 ...retry MIM board un-bypass n times 999 ...retry MIM board un-bypass infinite times Default value is 1.

What is tRingMgmtBcnRecBrdBypassRetryCount?

This sets how many times a Token Ring MIM (Media Interface Module) board that beacon recovery bypassed will be un-bypassed to test whether it was actually the cause of the beaconing, with a product default of 1: 0 disables the retries, 1-100 sets a finite count, and 999 retries indefinitely.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.18
snmpwalk -v2c -c public <target> DOT5-LOG-MIB::tRingMgmtBcnRecBrdBypassRetryCount

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.18.1
snmpget -v2c -c public <target> DOT5-LOG-MIB::tRingMgmtBcnRecBrdBypassRetryCount.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.18.1 i <value>

Start monitoring Cabletron Systems Token Ring hub/MAU (ring management/logging) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOT5-LOG-MIB::tRingMgmtBcnRecBrdBypassRetryCount OID value, configure state conditions and alerts, and monitor any Cabletron Systems Token Ring hub/MAU (ring management/logging) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.52cabletronCabletron-MIB
1.3.6.1.4.1.52.4mibsCT-PRIORITY-QUEUING
1.3.6.1.4.1.52.4.1ctronCTRON-ISDN-CONFIGURATION-MIB
1.3.6.1.4.1.52.4.1.2ctDataLinkCTRON-ISDN-CONFIGURATION-MIB
1.3.6.1.4.1.52.4.1.2.1dot5CTRON-MIB-NAMES
Numeric OIDNameModule
1.3.6.1.4.1.52.4.1.2.1.1dot5Rev1DOT5-LOG-MIB
1.3.6.1.4.1.52.4.1.2.1.1.1tRingDOT5-LOG-MIB
1.3.6.1.4.1.52.4.1.2.1.1.1.1tRingMgmtDOT5-LOG-MIB
1.3.6.1.4.1.52.4.1.2.1.1.1.1.1tRingMgmtRingDOT5-LOG-MIB
1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.18tRingMgmtBcnRecBrdBypassRetryCountDOT5-LOG-MIB