DOCS-SUBMGT3-MIB :: docsSubmgt3GrpSubFilterDs

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsDOCS-SUBMGT3-MIBdocsSubmgt3GrpSubFilterDs

docsSubmgt3GrpSubFilterDs

Module: DOCS-SUBMGT3-MIB

OID (symbolic): DOCS-SUBMGT3-MIB::docsSubmgt3GrpSubFilterDs

OID (numeric): 1.3.6.1.4.1.4491.2.1.10.1.4.1.3

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This attribute represents the filter group applied to traffic destined for subscriber's CPE attached to the referenced CM (attached to CM CPE interfaces). This value corresponds to the 'Subscriber Downstream Group' value of the 'Subscriber Management Filter Groups' encoding signaled during the CM registration or in its absence, to the SubFilterDownDef attribute of the Base object. The value zero or a filter group ID not configured in the CMTS means no filtering is applied to traffic destined to hosts attached to this CM.

What is docsSubmgt3GrpSubFilterDs?

This value (0-1024, default sourced from SubFilterDownDef) reports the downstream filter group ID currently applied to traffic destined for a specific modem's subscriber-side CPEs. Zero or an unconfigured group ID means no downstream filtering applies to that modem's subscriber traffic right now.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.10.1.4.1.3
snmpwalk -v2c -c public <target> DOCS-SUBMGT3-MIB::docsSubmgt3GrpSubFilterDs

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.10.1.4.1.3.1
snmpget -v2c -c public <target> DOCS-SUBMGT3-MIB::docsSubmgt3GrpSubFilterDs.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4491.2.1.10.1.4.1.3.1 i <value>

Start monitoring DOCSIS 3.0 CMTS headend equipment (subscriber CPE IPv4/IPv6 control, vendor-neutral CableLabs standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-SUBMGT3-MIB::docsSubmgt3GrpSubFilterDs OID value, configure state conditions and alerts, and monitor any DOCSIS 3.0 CMTS headend equipment (subscriber CPE IPv4/IPv6 control, vendor-neutral CableLabs standard) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4491cableLabsCLAB-DEF-MIB
1.3.6.1.4.1.4491.2clabProjectCLAB-DEF-MIB
1.3.6.1.4.1.4491.2.1clabProjDocsisCLAB-DEF-MIB
1.3.6.1.4.1.4491.2.1.10docsSubmgt3MibCLAB-DEF-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4491.2.1.10.1docsSubmgt3MibObjectsDOCS-SUBMGT3-MIB
1.3.6.1.4.1.4491.2.1.10.1.4docsSubmgt3GrpTableDOCS-SUBMGT3-MIB
1.3.6.1.4.1.4491.2.1.10.1.4.1docsSubmgt3GrpEntryDOCS-SUBMGT3-MIB
1.3.6.1.4.1.4491.2.1.10.1.4.1.3docsSubmgt3GrpSubFilterDsDOCS-SUBMGT3-MIB