DOCS-SUBMGT3-MIB :: docsSubmgt3GrpPsFilterUs

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsDOCS-SUBMGT3-MIBdocsSubmgt3GrpPsFilterUs

docsSubmgt3GrpPsFilterUs

Module: DOCS-SUBMGT3-MIB

OID (symbolic): DOCS-SUBMGT3-MIB::docsSubmgt3GrpPsFilterUs

OID (numeric): 1.3.6.1.4.1.4491.2.1.10.1.4.1.8

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This attribute represents the filter group applied to traffic originating from the Embedded CableHome Portal Services Element or Embedded Router on the referenced CM. This value corresponds to the 'PS Upstream Group' value of the 'Subscriber Management Filter Groups' encoding signaled during the CM registration or in its absence, to the SubFilterUpDef attribute of the Base object. The value zero or a filter group ID not configured in the CMTS means no filtering is applied to traffic originating from the Embedded CableHome Portal Services Element or Embedded Router on this CM.

What is docsSubmgt3GrpPsFilterUs?

This value (0-1024) reports the upstream filter group applied to traffic originating from the embedded Portal Server/Embedded Router function on a specific modem. It's the outbound counterpart to PsFilterDs for that same embedded routing element.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.10.1.4.1.8
snmpwalk -v2c -c public <target> DOCS-SUBMGT3-MIB::docsSubmgt3GrpPsFilterUs

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.10.1.4.1.8.1
snmpget -v2c -c public <target> DOCS-SUBMGT3-MIB::docsSubmgt3GrpPsFilterUs.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4491.2.1.10.1.4.1.8.1 i <value>

Start monitoring DOCSIS 3.0 CMTS headend equipment (subscriber CPE IPv4/IPv6 control, vendor-neutral CableLabs standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-SUBMGT3-MIB::docsSubmgt3GrpPsFilterUs OID value, configure state conditions and alerts, and monitor any DOCSIS 3.0 CMTS headend equipment (subscriber CPE IPv4/IPv6 control, vendor-neutral CableLabs standard) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4491cableLabsCLAB-DEF-MIB
1.3.6.1.4.1.4491.2clabProjectCLAB-DEF-MIB
1.3.6.1.4.1.4491.2.1clabProjDocsisCLAB-DEF-MIB
1.3.6.1.4.1.4491.2.1.10docsSubmgt3MibCLAB-DEF-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4491.2.1.10.1docsSubmgt3MibObjectsDOCS-SUBMGT3-MIB
1.3.6.1.4.1.4491.2.1.10.1.4docsSubmgt3GrpTableDOCS-SUBMGT3-MIB
1.3.6.1.4.1.4491.2.1.10.1.4.1docsSubmgt3GrpEntryDOCS-SUBMGT3-MIB
1.3.6.1.4.1.4491.2.1.10.1.4.1.8docsSubmgt3GrpPsFilterUsDOCS-SUBMGT3-MIB