DOCS-SEC-MIB :: docsSecSavCmAuthGrpName

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › DOCS-SEC-MIB › docsSecSavCmAuthGrpName

docsSecSavCmAuthGrpName

Module: DOCS-SEC-MIB

OID (symbolic): DOCS-SEC-MIB::docsSecSavCmAuthGrpName

OID (numeric): 1.3.6.1.4.1.4491.2.1.11.1.5.1.1

Node type: OBJECT-TYPE

Type: SnmpAdminString

Access: read-only

Description: This attribute references the Name attribute of the SavCfgList object of a CM. If the CM signaled group name is not configured in the CMTS, the CMTS ignores this attribute value for the purpose of Source Address Verification. The CMTS must allow the modification of the GrpName object and use the updated SAV rules for newly discovered CPEs from CMs. When a source IP address is claimed by two CMs (e.g., detected as duplicated), the CMTS must use the current SAV rules defined for both CMs in case the SAV GrpName rules may have been updated. In the case of a persisting conflict, it is up to vendor-implementation to decide what CM should hold the SAV authorization. The zero-length string indicates that no SAV Group was signaled by the CM. The zero-length value or a non-existing reference in the SavCfgList object means the SavCfgListName is ignored for the purpose of SAV.

What is docsSecSavCmAuthGrpName?

Reports the SAV group name a cable modem signaled in its config file, which the CMTS resolves against a locally configured docsSecSavCfgList entry to determine allowed source-IP subnet prefixes for that modem's CPEs; a zero-length value means the modem signaled no SAV group.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.11.1.5.1.1
snmpwalk -v2c -c public <target> DOCS-SEC-MIB::docsSecSavCmAuthGrpName

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.11.1.5.1.1.1
snmpget -v2c -c public <target> DOCS-SEC-MIB::docsSecSavCmAuthGrpName.1

Start monitoring DOCSIS CMTS/cable modem (security: certificates/TFTP/EAE, vendor-neutral CableLabs standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-SEC-MIB::docsSecSavCmAuthGrpName OID value, configure state conditions and alerts, and monitor any DOCSIS CMTS/cable modem (security: certificates/TFTP/EAE, vendor-neutral CableLabs standard) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4491cableLabsCLAB-DEF-MIB
1.3.6.1.4.1.4491.2clabProjectCLAB-DEF-MIB
1.3.6.1.4.1.4491.2.1clabProjDocsisCLAB-DEF-MIB
1.3.6.1.4.1.4491.2.1.11docsSecMibCLAB-DEF-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4491.2.1.11.1docsSecMibObjectsDOCS-SEC-MIB
1.3.6.1.4.1.4491.2.1.11.1.5docsSecSavCmAuthTableDOCS-SEC-MIB
1.3.6.1.4.1.4491.2.1.11.1.5.1docsSecSavCmAuthEntryDOCS-SEC-MIB
1.3.6.1.4.1.4491.2.1.11.1.5.1.1docsSecSavCmAuthGrpNameDOCS-SEC-MIB