All MIBs › DOCS-SEC-MIB › docsSecCmtsServerCfgConfigFileLearningEnable
docsSecCmtsServerCfgConfigFileLearningEnable
Module: DOCS-SEC-MIB
OID (symbolic): DOCS-SEC-MIB::docsSecCmtsServerCfgConfigFileLearningEnable
OID (numeric): 1.3.6.1.4.1.4491.2.1.11.1.1.2
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: This attribute enables and disables Configuration File Learning functionality. If this attribute is set to 'true' the CMTS will respond with Authentication Failure in the REG-RSP message when there is a mismatch between learned config file parameters and REG-REQ parameters. If this attribute is set to 'false', the CMTS will not execute config file learning and mismatch check. This attribute is only applicable when the TftpProxyEnabled attribute of the MdCfg object is 'true'.
What is docsSecCmtsServerCfgConfigFileLearningEnable?
Enables or disables Configuration File Learning on the CMTS, which cross-checks the parameters a cable modem provides at registration against what the CMTS observed in that modem's TFTP config file. When set to true, a mismatch causes the CMTS to reject the modem with a REG-RSP Authentication Failure, guarding against modems presenting an altered config file.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.11.1.1.2 snmpwalk -v2c -c public <target> DOCS-SEC-MIB::docsSecCmtsServerCfgConfigFileLearningEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.11.1.1.2.1 snmpget -v2c -c public <target> DOCS-SEC-MIB::docsSecCmtsServerCfgConfigFileLearningEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4491.2.1.11.1.1.2.1 s <value>
Start monitoring DOCSIS CMTS/cable modem (security: certificates/TFTP/EAE, vendor-neutral CableLabs standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-SEC-MIB::docsSecCmtsServerCfgConfigFileLearningEnable OID value, configure state conditions and alerts, and monitor any DOCSIS CMTS/cable modem (security: certificates/TFTP/EAE, vendor-neutral CableLabs standard) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4491 | cableLabs | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2 | clabProject | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.1 | clabProjDocsis | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.1.11 | docsSecMib | CLAB-DEF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4491.2.1.11.1 | docsSecMibObjects | DOCS-SEC-MIB |
| 1.3.6.1.4.1.4491.2.1.11.1.1 | docsSecCmtsServerCfg | DOCS-SEC-MIB |
| 1.3.6.1.4.1.4491.2.1.11.1.1.2 | docsSecCmtsServerCfgConfigFileLearningEnable | DOCS-SEC-MIB |