DOCS-SEC-MIB :: docsBpi2CodeUpdateCvcChain

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DOCS-SEC-MIB › docsBpi2CodeUpdateCvcChain

docsBpi2CodeUpdateCvcChain

Module: DOCS-SEC-MIB

OID (symbolic): DOCS-SEC-MIB::docsBpi2CodeUpdateCvcChain

OID (numeric): 1.3.6.1.2.1.126.1.4.10

Node type: OBJECT-TYPE

Type: DocsCvcCaCertificateChain

Access: read-write

Description: The value of this object is a degenerate PKCS7 signedData structure that contains the CVC and the CVC CA certificate chain in the certificates field. Setting this object triggers the device to verify the CVC and update the cvcAccessStart values. The content of this object is then discarded. If the device is not enabled to upgrade codefiles, or if the CVC verification fails, the CVC will be rejected. Reading this object always returns the zero-length OCTET STRING.

What is docsBpi2CodeUpdateCvcChain?

Deprecated object used to push a PKCS7 bundle containing a Code Verification Certificate (CVC) and its CA chain to a cable modem; setting it triggers the device to validate the CVC and, if valid, authorize a firmware code download, after which the value is discarded. Reading it always returns an empty string, and DOCSIS 3.1 devices should use the equivalent object in DOCS-BPI2EXT-MIB instead.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.126.1.4.10
snmpwalk -v2c -c public <target> DOCS-SEC-MIB::docsBpi2CodeUpdateCvcChain

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.126.1.4.10.1
snmpget -v2c -c public <target> DOCS-SEC-MIB::docsBpi2CodeUpdateCvcChain.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.2.1.126.1.4.10.1 s <value>

Start monitoring DOCSIS CMTS/cable modem (security: certificates/TFTP/EAE, vendor-neutral CableLabs standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-SEC-MIB::docsBpi2CodeUpdateCvcChain OID value, configure state conditions and alerts, and monitor any DOCSIS CMTS/cable modem (security: certificates/TFTP/EAE, vendor-neutral CableLabs standard) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAPERTUS-NPG-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.126docsBpi2MIBDOCS-IETF-BPI2-MIB
1.3.6.1.2.1.126.1docsBpi2MIBObjectsDOCS-IETF-BPI2-MIB
1.3.6.1.2.1.126.1.4docsBpi2CodeDownloadControlDOCS-IETF-BPI2-MIB
Numeric OIDNameModule
1.3.6.1.2.1.126.1.4.10docsBpi2CodeUpdateCvcChainDOCS-SEC-MIB