DOCS-PNM-MIB :: docsPnmCmtsUtscCfgTimestamp

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DOCS-PNM-MIB › docsPnmCmtsUtscCfgTimestamp

docsPnmCmtsUtscCfgTimestamp

Module: DOCS-PNM-MIB

OID (symbolic): DOCS-PNM-MIB::docsPnmCmtsUtscCfgTimestamp

OID (numeric): 1.3.6.1.4.1.4491.2.1.27.1.3.10.2.1.7

Node type: OBJECT-TYPE

Type: TimeStamp

Access: read-write

Description: This attribute specifies the specific time in the future when upstream spectrum sample capture is required to be initiated. If Enable is true, TriggerMode is set to timestamp, configuration settings have been applied, and InitiateTest is true the CCAP MUST initiate sampling when the configured timestamp occurs. The CCAP will continue to sample the configured upstream spectrum until FFT is disabled or a new configuration is applied; however, a single capture typically is made in this mode.

What is docsPnmCmtsUtscCfgTimestamp?

The specific future time at which upstream spectrum sample capture should begin, used when TriggerMode is timestamp and InitiateTest/Enable are true. Lets an admin schedule a capture for a precise moment, e.g. to correlate with an expected external event, though typically only a single capture results from this mode.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.27.1.3.10.2.1.7
snmpwalk -v2c -c public <target> DOCS-PNM-MIB::docsPnmCmtsUtscCfgTimestamp

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.27.1.3.10.2.1.7.1
snmpget -v2c -c public <target> DOCS-PNM-MIB::docsPnmCmtsUtscCfgTimestamp.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4491.2.1.27.1.3.10.2.1.7.1 s <value>

Start monitoring DOCSIS 3.1 cable modem/CMTS (Proactive Network Maintenance, vendor-neutral CableLabs standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-PNM-MIB::docsPnmCmtsUtscCfgTimestamp OID value, configure state conditions and alerts, and monitor any DOCSIS 3.1 cable modem/CMTS (Proactive Network Maintenance, vendor-neutral CableLabs standard) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4491cableLabsCLAB-DEF-MIB
1.3.6.1.4.1.4491.2clabProjectCLAB-DEF-MIB
1.3.6.1.4.1.4491.2.1clabProjDocsisCLAB-DEF-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4491.2.1.27docsPnmMIBDOCS-PNM-MIB
1.3.6.1.4.1.4491.2.1.27.1docsPnmMibObjectsDOCS-PNM-MIB
1.3.6.1.4.1.4491.2.1.27.1.3docsPnmCmtsObjectsDOCS-PNM-MIB
1.3.6.1.4.1.4491.2.1.27.1.3.10docsPnmCmtsUtscObjectsDOCS-PNM-MIB
1.3.6.1.4.1.4491.2.1.27.1.3.10.2docsPnmCmtsUtscCfgTableDOCS-PNM-MIB
1.3.6.1.4.1.4491.2.1.27.1.3.10.2.1docsPnmCmtsUtscCfgEntryDOCS-PNM-MIB
1.3.6.1.4.1.4491.2.1.27.1.3.10.2.1.7docsPnmCmtsUtscCfgTimestampDOCS-PNM-MIB