DOCS-PNM-MIB :: docsPnmCmtsUtscCfgRepeatPeriod

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DOCS-PNM-MIB › docsPnmCmtsUtscCfgRepeatPeriod

docsPnmCmtsUtscCfgRepeatPeriod

Module: DOCS-PNM-MIB

OID (symbolic): DOCS-PNM-MIB::docsPnmCmtsUtscCfgRepeatPeriod

OID (numeric): 1.3.6.1.4.1.4491.2.1.27.1.3.10.2.1.18

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This attribute specifies the interval in microseconds between consecutive triggers for FFT sample capture. The CCAP is permitted to trigger at larger intervals if unable to support the requested interval. Configuring a zero value indicates the test is to run once only.

The CCAP MUST reject an attempt to set RepeatPeriod to a value greater than the current value of FreeRunDuration.

What is docsPnmCmtsUtscCfgRepeatPeriod?

The interval, in microseconds, between consecutive FFT sample-capture triggers; a value of zero means run the test only once, and the CCAP may use a longer interval if it can't support the requested one. Used with freeRunning trigger mode to space out repeated captures; the CCAP rejects setting this larger than the current FreeRunDuration.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.27.1.3.10.2.1.18
snmpwalk -v2c -c public <target> DOCS-PNM-MIB::docsPnmCmtsUtscCfgRepeatPeriod

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.27.1.3.10.2.1.18.1
snmpget -v2c -c public <target> DOCS-PNM-MIB::docsPnmCmtsUtscCfgRepeatPeriod.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4491.2.1.27.1.3.10.2.1.18.1 i <value>

Start monitoring DOCSIS 3.1 cable modem/CMTS (Proactive Network Maintenance, vendor-neutral CableLabs standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-PNM-MIB::docsPnmCmtsUtscCfgRepeatPeriod OID value, configure state conditions and alerts, and monitor any DOCSIS 3.1 cable modem/CMTS (Proactive Network Maintenance, vendor-neutral CableLabs standard) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4491cableLabsCLAB-DEF-MIB
1.3.6.1.4.1.4491.2clabProjectCLAB-DEF-MIB
1.3.6.1.4.1.4491.2.1clabProjDocsisCLAB-DEF-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4491.2.1.27docsPnmMIBDOCS-PNM-MIB
1.3.6.1.4.1.4491.2.1.27.1docsPnmMibObjectsDOCS-PNM-MIB
1.3.6.1.4.1.4491.2.1.27.1.3docsPnmCmtsObjectsDOCS-PNM-MIB
1.3.6.1.4.1.4491.2.1.27.1.3.10docsPnmCmtsUtscObjectsDOCS-PNM-MIB
1.3.6.1.4.1.4491.2.1.27.1.3.10.2docsPnmCmtsUtscCfgTableDOCS-PNM-MIB
1.3.6.1.4.1.4491.2.1.27.1.3.10.2.1docsPnmCmtsUtscCfgEntryDOCS-PNM-MIB
1.3.6.1.4.1.4491.2.1.27.1.3.10.2.1.18docsPnmCmtsUtscCfgRepeatPeriodDOCS-PNM-MIB