All MIBs › DOCS-PNM-MIB › docsPnmCmtsUsOfdmaAQProbeEnable
docsPnmCmtsUsOfdmaAQProbeEnable
Module: DOCS-PNM-MIB
OID (symbolic): DOCS-PNM-MIB::docsPnmCmtsUsOfdmaAQProbeEnable
OID (numeric): 1.3.6.1.4.1.4491.2.1.27.1.3.3.1.4
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: This attribute causes the CMTS to begin the measurement of a probe for the selected CM or for a quiet period if the UseIdleSid attribute is enabled. The Enable attribute is cleared internally by the CMTS when the measurement has been completed.
Setting this object to a value of 'false' instructs the CMTS to stop the measurement. In this case the value of 'docsPnmCmtsUsOfdmaAQProbeMeasStatus' will be set to 'inactive'.
When read, this object returns 'true' if the CMTS is actively taking a measurement, otherwise it returns 'false'.
Interaction with other table rows:
- This object returns 'inconsistentValue' if set to 'true' while the value of 'docsPnmCmtsUsOfdmaAQProbeMeasStatus' is a value of 'busy'.
- Default values are provided for read-write objects in this table; thus, this object may be set to 'true' without explicitly setting these values. However, the default values may not be appropriate and care should be taken to insure these values are correct for the desired test case.
- Setting this object to a value of 'true' will change the value of the 'docsPnmCmDsOfdmSymMeasStatus' to 'busy'.
What is docsPnmCmtsUsOfdmaAQProbeEnable?
Setting this 'true' starts the Active/Quiet Probe measurement for the targeted CM (or the idle SID if UseIdleSid is set); the CMTS clears it internally once the measurement completes. The main trigger for this measurement; setting it 'false' mid-measurement aborts it and sets status to 'inactive'.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.27.1.3.3.1.4 snmpwalk -v2c -c public <target> DOCS-PNM-MIB::docsPnmCmtsUsOfdmaAQProbeEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.27.1.3.3.1.4.1 snmpget -v2c -c public <target> DOCS-PNM-MIB::docsPnmCmtsUsOfdmaAQProbeEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4491.2.1.27.1.3.3.1.4.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> docsPnmCmtsUsOfdmaAQProbeEnable.1
Start monitoring DOCSIS 3.1 cable modem/CMTS (Proactive Network Maintenance, vendor-neutral CableLabs standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-PNM-MIB::docsPnmCmtsUsOfdmaAQProbeEnable OID value, configure state conditions and alerts, and monitor any DOCSIS 3.1 cable modem/CMTS (Proactive Network Maintenance, vendor-neutral CableLabs standard) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4491 | cableLabs | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2 | clabProject | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.1 | clabProjDocsis | CLAB-DEF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4491.2.1.27 | docsPnmMIB | DOCS-PNM-MIB |
| 1.3.6.1.4.1.4491.2.1.27.1 | docsPnmMibObjects | DOCS-PNM-MIB |
| 1.3.6.1.4.1.4491.2.1.27.1.3 | docsPnmCmtsObjects | DOCS-PNM-MIB |
| 1.3.6.1.4.1.4491.2.1.27.1.3.3 | docsPnmCmtsUsOfdmaAQProbeTable | DOCS-PNM-MIB |
| 1.3.6.1.4.1.4491.2.1.27.1.3.3.1 | docsPnmCmtsUsOfdmaAQProbeEntry | DOCS-PNM-MIB |
| 1.3.6.1.4.1.4491.2.1.27.1.3.3.1.4 | docsPnmCmtsUsOfdmaAQProbeEnable | DOCS-PNM-MIB |