All MIBs › DOCS-PNM-MIB › docsPnmCmtsUsImpNoiseMeasStatus
docsPnmCmtsUsImpNoiseMeasStatus
Module: DOCS-PNM-MIB
OID (symbolic): DOCS-PNM-MIB::docsPnmCmtsUsImpNoiseMeasStatus
OID (numeric): 1.3.6.1.4.1.4491.2.1.27.1.3.4.1.11
Node type: OBJECT-TYPE
Type: MeasStatusType
Access: read-only
Description: This attribute is used to determine the status of the command. When the Status is sampleReady, the CCAP has completed the measurement and the Enable attribute has been cleared. If the StartTriggerLevel is set to a non zero value and the Enable attribute is set to true, then collection of Impulse Noise events is in progress and the MeasStatus attribute will return a value of 'busy'. If the Enable attribute is cleared while collection of Impulse Noise events is active, the MeasStatus attribute will be set to 'sampleReady.
What is docsPnmCmtsUsImpNoiseMeasStatus?
Reports the measurement status: 'busy' while impulse-noise events are actively being collected (StartTriggerLevel nonzero and Enable true), 'sampleReady' once the collection is stopped/cleared. The standard poll-before-fetch status object for this measurement table, with the added nuance that 'busy' spans the whole ongoing collection window rather than a single quick test.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.27.1.3.4.1.11 snmpwalk -v2c -c public <target> DOCS-PNM-MIB::docsPnmCmtsUsImpNoiseMeasStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.27.1.3.4.1.11.1 snmpget -v2c -c public <target> DOCS-PNM-MIB::docsPnmCmtsUsImpNoiseMeasStatus.1
Start monitoring DOCSIS 3.1 cable modem/CMTS (Proactive Network Maintenance, vendor-neutral CableLabs standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-PNM-MIB::docsPnmCmtsUsImpNoiseMeasStatus OID value, configure state conditions and alerts, and monitor any DOCSIS 3.1 cable modem/CMTS (Proactive Network Maintenance, vendor-neutral CableLabs standard) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4491 | cableLabs | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2 | clabProject | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.1 | clabProjDocsis | CLAB-DEF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4491.2.1.27 | docsPnmMIB | DOCS-PNM-MIB |
| 1.3.6.1.4.1.4491.2.1.27.1 | docsPnmMibObjects | DOCS-PNM-MIB |
| 1.3.6.1.4.1.4491.2.1.27.1.3 | docsPnmCmtsObjects | DOCS-PNM-MIB |
| 1.3.6.1.4.1.4491.2.1.27.1.3.4 | docsPnmCmtsUsImpNoiseTable | DOCS-PNM-MIB |
| 1.3.6.1.4.1.4491.2.1.27.1.3.4.1 | docsPnmCmtsUsImpNoiseEntry | DOCS-PNM-MIB |
| 1.3.6.1.4.1.4491.2.1.27.1.3.4.1.11 | docsPnmCmtsUsImpNoiseMeasStatus | DOCS-PNM-MIB |