All MIBs › DOCS-PNM-MIB › docsPnmCmtsUsHistTimeOut
docsPnmCmtsUsHistTimeOut
Module: DOCS-PNM-MIB
OID (symbolic): DOCS-PNM-MIB::docsPnmCmtsUsHistTimeOut
OID (numeric): 1.3.6.1.4.1.4491.2.1.27.1.3.5.1.2
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This attribute sets a seconds time-out timer for capturing histogram data.
This attribute is used to automatically clear the Enable attribute when the timeout expires. If the value of this attribute is zero, the CCAP MUST collect data until the value is changed, stopped, or until any dwell counter approaches its 32 bit rollover value. If the Timeout attribute is re-written while Enable is 'true', the CCAP MUST restart the timeout timer with the new Timeout value and continue collecting data.
When the timeout expires the 'docsPnmCmtsUsHistEnable' object will be set to 'false' and the capture will stop. When this happens, the data collected up to this point will be saved in the the file defined by the 'docsPnmCmtsUsHistFileName', and the value of 'docsPnmCmtsUsHistMeasStatus' will be set to 'sampleReady'.
Setting this value does not start a capture. Captures can only be started by setting the 'docsPnmCmtsUsHistEnable' object.
If this object is written while the 'docsPnmCmtsUsHistEnable' object is 'true', the timer is restarted.
If this object is set to a value of 'zero', there is no timeout and the collection of data will continue indefinitely.
This object returns the value that it was last set with.
What is docsPnmCmtsUsHistTimeOut?
Seconds (0-65535, default 1800) after which upstream histogram collection auto-stops and saves the file; 0 means collect indefinitely until stopped or a dwell counter nears rollover; re-writing this while enabled restarts the timer. Lets an admin bound how long an upstream histogram capture runs so it doesn't collect forever unattended.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.27.1.3.5.1.2 snmpwalk -v2c -c public <target> DOCS-PNM-MIB::docsPnmCmtsUsHistTimeOut
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.27.1.3.5.1.2.1 snmpget -v2c -c public <target> DOCS-PNM-MIB::docsPnmCmtsUsHistTimeOut.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4491.2.1.27.1.3.5.1.2.1 i <value>
Start monitoring DOCSIS 3.1 cable modem/CMTS (Proactive Network Maintenance, vendor-neutral CableLabs standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-PNM-MIB::docsPnmCmtsUsHistTimeOut OID value, configure state conditions and alerts, and monitor any DOCSIS 3.1 cable modem/CMTS (Proactive Network Maintenance, vendor-neutral CableLabs standard) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4491 | cableLabs | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2 | clabProject | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.1 | clabProjDocsis | CLAB-DEF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4491.2.1.27 | docsPnmMIB | DOCS-PNM-MIB |
| 1.3.6.1.4.1.4491.2.1.27.1 | docsPnmMibObjects | DOCS-PNM-MIB |
| 1.3.6.1.4.1.4491.2.1.27.1.3 | docsPnmCmtsObjects | DOCS-PNM-MIB |
| 1.3.6.1.4.1.4491.2.1.27.1.3.5 | docsPnmCmtsUsHistTable | DOCS-PNM-MIB |
| 1.3.6.1.4.1.4491.2.1.27.1.3.5.1 | docsPnmCmtsUsHistEntry | DOCS-PNM-MIB |
| 1.3.6.1.4.1.4491.2.1.27.1.3.5.1.2 | docsPnmCmtsUsHistTimeOut | DOCS-PNM-MIB |