All MIBs › DOCS-PNM-MIB › docsPnmCmtsUsHistEnable
docsPnmCmtsUsHistEnable
Module: DOCS-PNM-MIB
OID (symbolic): DOCS-PNM-MIB::docsPnmCmtsUsHistEnable
OID (numeric): 1.3.6.1.4.1.4491.2.1.27.1.3.5.1.1
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: Setting this object to a value of 'true' instructs the CCAP to begin collection of histogram data and when enabled, the CCAP continues producing new data at its own rate.
This value is only allowed to be set to 'true' if the value of 'docsPnmCmtsUsHistMeasStatus' is a value other than 'busy'. Setting this value to 'true' will change the value of the 'docsPnmCmtsUsHistMeasStatus' to 'busy'.
Setting this object to a value of 'false' instructs the CCAP to stop the collection of histogram data and to generate the file.
This object returns 'true' if the CCAP is actively collecting histogram data. Otherwise it returns 'false'.
A restart may be accomplished by setting this attribute to 'false' and then back to 'true'.
Interaction with other table rows:
- This object returns 'inconsistentValue' if set to 'true' while the value of 'docsPnmCmtsUsHistMeasStatus' is a value of 'busy' for this row OR for any row in the table. That is, ONLY ONE ROW IN THE TABLE MAY BE ALLOWED TO BE 'true' AT THE SAME TIME.
- This object returns 'inconsistentValue' if set to 'true' while the CM is in DOCSIS Light Sleep (DLS) mode or the CM is in battery-backup mode.
- Setting this object to a value of 'true' will change the value of the 'docsPnmCmtsUsHistMeasStatus' to 'busy'.
What is docsPnmCmtsUsHistEnable?
Setting this 'true' starts upstream amplitude-histogram data collection at the CCAP, continuing at its own rate; only one row across the table may be enabled at a time, and toggling false-then-true restarts collection. The upstream, CMTS-side counterpart to docsPnmCmDsHistEnable, used to characterize the statistical distribution of upstream received signal levels.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.27.1.3.5.1.1 snmpwalk -v2c -c public <target> DOCS-PNM-MIB::docsPnmCmtsUsHistEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.27.1.3.5.1.1.1 snmpget -v2c -c public <target> DOCS-PNM-MIB::docsPnmCmtsUsHistEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4491.2.1.27.1.3.5.1.1.1 s <value>
Start monitoring DOCSIS 3.1 cable modem/CMTS (Proactive Network Maintenance, vendor-neutral CableLabs standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-PNM-MIB::docsPnmCmtsUsHistEnable OID value, configure state conditions and alerts, and monitor any DOCSIS 3.1 cable modem/CMTS (Proactive Network Maintenance, vendor-neutral CableLabs standard) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4491 | cableLabs | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2 | clabProject | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.1 | clabProjDocsis | CLAB-DEF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4491.2.1.27 | docsPnmMIB | DOCS-PNM-MIB |
| 1.3.6.1.4.1.4491.2.1.27.1 | docsPnmMibObjects | DOCS-PNM-MIB |
| 1.3.6.1.4.1.4491.2.1.27.1.3 | docsPnmCmtsObjects | DOCS-PNM-MIB |
| 1.3.6.1.4.1.4491.2.1.27.1.3.5 | docsPnmCmtsUsHistTable | DOCS-PNM-MIB |
| 1.3.6.1.4.1.4491.2.1.27.1.3.5.1 | docsPnmCmtsUsHistEntry | DOCS-PNM-MIB |
| 1.3.6.1.4.1.4491.2.1.27.1.3.5.1.1 | docsPnmCmtsUsHistEnable | DOCS-PNM-MIB |