DOCS-PNM-MIB :: docsPnmCmtsOptRespCorrectedCodewordCt

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DOCS-PNM-MIB › docsPnmCmtsOptRespCorrectedCodewordCt

docsPnmCmtsOptRespCorrectedCodewordCt

Module: DOCS-PNM-MIB

OID (symbolic): DOCS-PNM-MIB::docsPnmCmtsOptRespCorrectedCodewordCt

OID (numeric): 1.3.6.1.4.1.4491.2.1.27.1.3.9.4.1.8

Node type: OBJECT-TYPE

Type: Counter64

Access: read-only

Description: This attribute is a count of the measured number of codewords that the CM has successfully received and was able to correct during the testing interval for the profile being tested. Unsigned integer count of codewords that were examined during testing. If Codeword Tagging is disabled, this count includes all codewords received on the profile in question for the duration of the test. If Codeword Tagging is enabled, this count includes only codewords received on the profile in question for the duration of the test for which the 'T' bit was set in the NCP pointing to the codeword. The location of the 'T' bit is specified in the PHYv3.1 Spec.

What is docsPnmCmtsOptRespCorrectedCodewordCt?

The count of codewords the CM received and was able to correct (via LDPC/BCH decoding) during the OPT test interval for the profile under test, scoped by Codeword Tagging the same way as docsPnmCmtsOptRespCodewordCt. A rising ratio of corrected to total codewords suggests the profile is running with reduced but still recoverable margin.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.27.1.3.9.4.1.8
snmpwalk -v2c -c public <target> DOCS-PNM-MIB::docsPnmCmtsOptRespCorrectedCodewordCt

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.27.1.3.9.4.1.8.1
snmpget -v2c -c public <target> DOCS-PNM-MIB::docsPnmCmtsOptRespCorrectedCodewordCt.1

Start monitoring DOCSIS 3.1 cable modem/CMTS (Proactive Network Maintenance, vendor-neutral CableLabs standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-PNM-MIB::docsPnmCmtsOptRespCorrectedCodewordCt OID value, configure state conditions and alerts, and monitor any DOCSIS 3.1 cable modem/CMTS (Proactive Network Maintenance, vendor-neutral CableLabs standard) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4491cableLabsCLAB-DEF-MIB
1.3.6.1.4.1.4491.2clabProjectCLAB-DEF-MIB
1.3.6.1.4.1.4491.2.1clabProjDocsisCLAB-DEF-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4491.2.1.27docsPnmMIBDOCS-PNM-MIB
1.3.6.1.4.1.4491.2.1.27.1docsPnmMibObjectsDOCS-PNM-MIB
1.3.6.1.4.1.4491.2.1.27.1.3docsPnmCmtsObjectsDOCS-PNM-MIB
1.3.6.1.4.1.4491.2.1.27.1.3.9docsPnmCmtsOptObjectsDOCS-PNM-MIB
1.3.6.1.4.1.4491.2.1.27.1.3.9.4docsPnmCmtsOptRespTableDOCS-PNM-MIB
1.3.6.1.4.1.4491.2.1.27.1.3.9.4.1docsPnmCmtsOptRespEntryDOCS-PNM-MIB
1.3.6.1.4.1.4491.2.1.27.1.3.9.4.1.8docsPnmCmtsOptRespCorrectedCodewordCtDOCS-PNM-MIB