All MIBs › DOCS-PNM-MIB › docsPnmCmtsDsOfdmSymTrigEnable
docsPnmCmtsDsOfdmSymTrigEnable
Module: DOCS-PNM-MIB
OID (symbolic): DOCS-PNM-MIB::docsPnmCmtsDsOfdmSymTrigEnable
OID (numeric): 1.3.6.1.4.1.4491.2.1.27.1.3.1.1.1
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: Setting this object to a value of 'true' instructs the CMTS to insert a Trigger Message Block in the PLC with a Group ID matching the CM's TriggerGroupID. The CMTS captures the Symbol that it designated in the Trigger Message Block. The TriggerEnable is a one-shot enable and the attribute is disabled when the CMTS has completed the acquisition of the designated Symbol.
Interaction with other table rows:
- This object returns 'inconsistentValue' if set to 'true' while the value of 'docsPnmCmtsDsOfdmSymTrigMeasStatus' is a value of 'busy' for this row OR for any row in the table. That is, ONLY ONE ROW IN THE TABLE MAY BE ALLOWED TO BE 'true' AT THE SAME TIME.
- Default values for 'docsPnmCmtsDsOfdmSymCaptFileName', and 'docsPnmCmtsDsOfdmSymTrigGroupId' objects are defined; thus, this object may be set to 'true' without explicitly setting these values. Care should be taken to insure these values are correct for the desired test case.
- Setting this object to a value of 'true' will change the value of the 'docsPnmCmtsDsOfdmSymTrigMeasStatus' to 'busy'.
What is docsPnmCmtsDsOfdmSymTrigEnable?
Setting this 'true' tells the CMTS to insert a Trigger Message Block in the PLC matching a CM's TriggerGroupID so it captures a designated downstream symbol; it's a one-shot flag that self-clears once capture completes, and only one row across the table may be armed at a time. The CMTS-side counterpart to the CM's own symbol-capture trigger, used to command a specific CM (or group) to perform a synchronized capture.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.27.1.3.1.1.1 snmpwalk -v2c -c public <target> DOCS-PNM-MIB::docsPnmCmtsDsOfdmSymTrigEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.27.1.3.1.1.1.1 snmpget -v2c -c public <target> DOCS-PNM-MIB::docsPnmCmtsDsOfdmSymTrigEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4491.2.1.27.1.3.1.1.1.1 s <value>
Start monitoring DOCSIS 3.1 cable modem/CMTS (Proactive Network Maintenance, vendor-neutral CableLabs standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-PNM-MIB::docsPnmCmtsDsOfdmSymTrigEnable OID value, configure state conditions and alerts, and monitor any DOCSIS 3.1 cable modem/CMTS (Proactive Network Maintenance, vendor-neutral CableLabs standard) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4491 | cableLabs | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2 | clabProject | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.1 | clabProjDocsis | CLAB-DEF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4491.2.1.27 | docsPnmMIB | DOCS-PNM-MIB |
| 1.3.6.1.4.1.4491.2.1.27.1 | docsPnmMibObjects | DOCS-PNM-MIB |
| 1.3.6.1.4.1.4491.2.1.27.1.3 | docsPnmCmtsObjects | DOCS-PNM-MIB |
| 1.3.6.1.4.1.4491.2.1.27.1.3.1 | docsPnmCmtsDsOfdmSymCapTable | DOCS-PNM-MIB |
| 1.3.6.1.4.1.4491.2.1.27.1.3.1.1 | docsPnmCmtsDsOfdmSymCapEntry | DOCS-PNM-MIB |
| 1.3.6.1.4.1.4491.2.1.27.1.3.1.1.1 | docsPnmCmtsDsOfdmSymTrigEnable | DOCS-PNM-MIB |