All MIBs › DOCS-PNM-MIB › docsPnmCmDsOfdmSymTrigEnableTimeout
docsPnmCmDsOfdmSymTrigEnableTimeout
Module: DOCS-PNM-MIB
OID (symbolic): DOCS-PNM-MIB::docsPnmCmDsOfdmSymTrigEnableTimeout
OID (numeric): 1.3.6.1.4.1.4491.2.1.27.1.2.2.1.2
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This attribute is used to disable the TrigEnable if no PLC containing a Group ID matching the CM's TrigGroupId in a Trigger Message Block is received within the timeout period. The CM must timeout the test after TriggerEnableTimeout seconds from the time when the TriggerEnable was set to 'true'. A value of 0 indicates that no timeout is enforced, in this case the CM must enable the test until it completes, note in this case, the trigger could be enabled indefinitely.
This value can only be changed while a test is not in progress. An attempt to set this value while the value of 'docsPnmCmDsOfdmSymMeasStatus' is 'busy' will return 'inconsistentValue'.
What is docsPnmCmDsOfdmSymTrigEnableTimeout?
Timeout in seconds (0-3600, default 600) after which the CM automatically disarms symbol-capture triggering if no matching Trigger Message Block ever arrives; 0 disables the timeout entirely. Prevents a symbol capture from staying armed indefinitely if the expected CMTS trigger never shows up, and can only be changed while the test is not busy.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.27.1.2.2.1.2 snmpwalk -v2c -c public <target> DOCS-PNM-MIB::docsPnmCmDsOfdmSymTrigEnableTimeout
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.27.1.2.2.1.2.1 snmpget -v2c -c public <target> DOCS-PNM-MIB::docsPnmCmDsOfdmSymTrigEnableTimeout.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4491.2.1.27.1.2.2.1.2.1 i <value>
Start monitoring DOCSIS 3.1 cable modem/CMTS (Proactive Network Maintenance, vendor-neutral CableLabs standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-PNM-MIB::docsPnmCmDsOfdmSymTrigEnableTimeout OID value, configure state conditions and alerts, and monitor any DOCSIS 3.1 cable modem/CMTS (Proactive Network Maintenance, vendor-neutral CableLabs standard) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4491 | cableLabs | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2 | clabProject | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.1 | clabProjDocsis | CLAB-DEF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4491.2.1.27 | docsPnmMIB | DOCS-PNM-MIB |
| 1.3.6.1.4.1.4491.2.1.27.1 | docsPnmMibObjects | DOCS-PNM-MIB |
| 1.3.6.1.4.1.4491.2.1.27.1.2 | docsPnmCmObjects | DOCS-PNM-MIB |
| 1.3.6.1.4.1.4491.2.1.27.1.2.2 | docsPnmCmDsOfdmSymCapTable | DOCS-PNM-MIB |
| 1.3.6.1.4.1.4491.2.1.27.1.2.2.1 | docsPnmCmDsOfdmSymCapEntry | DOCS-PNM-MIB |
| 1.3.6.1.4.1.4491.2.1.27.1.2.2.1.2 | docsPnmCmDsOfdmSymTrigEnableTimeout | DOCS-PNM-MIB |