All MIBs › DOCS-PNM-MIB › docsPnmBulkDestIpAddrType
docsPnmBulkDestIpAddrType
Module: DOCS-PNM-MIB
OID (symbolic): DOCS-PNM-MIB::docsPnmBulkDestIpAddrType
OID (numeric): 1.3.6.1.4.1.4491.2.1.27.1.1.1.1
Node type: OBJECT-TYPE
Type: InetAddressType
Access: read-write
Description: This object represents the IP address type of the 'docsPnmBulkDestIpAddr' object. This value is of type InetAddressType which is defined by RFC4001.
Allowed values for this object are: 'unknown', 'ipv4', 'ipv6'.
A successful connection depends on the value of this attribute being set to an IP Family supported by the device. For example, if this value is set to IPv6 and the device is operating in an IPv4-only mode, a successful upload will not be possible. In this case the 'docsPnmBulkFileUploadStatus' object would reflect the error. The CM must NOT allow the value of docsPnmBulkDestIpAddrType to change if the value of PnmCmCtlStatus is any value other than 'ready'.
What is docsPnmBulkDestIpAddrType?
Sets the IP address family (unknown, ipv4, or ipv6) that qualifies the docsPnmBulkDestIpAddr object used for bulk PNM data uploads. An admin must set this to match the CM's actual IP-support mode (e.g. not IPv6 on an IPv4-only device) or the upload will fail; it can only be changed while docsPnmCmCtlStatus is 'ready'.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.27.1.1.1.1 snmpwalk -v2c -c public <target> DOCS-PNM-MIB::docsPnmBulkDestIpAddrType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.27.1.1.1.1.1 snmpget -v2c -c public <target> DOCS-PNM-MIB::docsPnmBulkDestIpAddrType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4491.2.1.27.1.1.1.1.1 s <value>
Start monitoring DOCSIS 3.1 cable modem/CMTS (Proactive Network Maintenance, vendor-neutral CableLabs standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-PNM-MIB::docsPnmBulkDestIpAddrType OID value, configure state conditions and alerts, and monitor any DOCSIS 3.1 cable modem/CMTS (Proactive Network Maintenance, vendor-neutral CableLabs standard) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4491 | cableLabs | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2 | clabProject | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.1 | clabProjDocsis | CLAB-DEF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4491.2.1.27 | docsPnmMIB | DOCS-PNM-MIB |
| 1.3.6.1.4.1.4491.2.1.27.1 | docsPnmMibObjects | DOCS-PNM-MIB |
| 1.3.6.1.4.1.4491.2.1.27.1.1 | docsPnmBulkData | DOCS-PNM-MIB |
| 1.3.6.1.4.1.4491.2.1.27.1.1.1 | docsPnmBulkCtl | DOCS-PNM-MIB |
| 1.3.6.1.4.1.4491.2.1.27.1.1.1.1 | docsPnmBulkDestIpAddrType | DOCS-PNM-MIB |