All MIBs › DOCS-MCAST-AUTH-MIB › docsMcastAuthCtrlDefProfileNameList
docsMcastAuthCtrlDefProfileNameList
Module: DOCS-MCAST-AUTH-MIB
OID (symbolic): DOCS-MCAST-AUTH-MIB::docsMcastAuthCtrlDefProfileNameList
OID (numeric): 1.3.6.1.4.1.4491.2.1.19.1.1.2
Node type: OBJECT-TYPE
Type: SnmpTagList
Access: read-write
Description: When IP Multicast Authorization is enforced, this attribute provides the default set of Multicast Authorization Profiles the CMTS enforces for a CM in the case that this CM didn't signal a set of profiles during the registration process. If the Default Multicast Authorization Group Name is zero length string, the DefAction attribute determines whether a join request is authorized when a CM registers without a Multicast Authorization Profile Set or a list of config File Session Rules. If the CMTS supports more than 1 profile name as a default, the CMTS enforces each of the profiles in order until the maximum number of profiles is reached. This attribute indicates one or more Multicast Authorization Profiles.
What is docsMcastAuthCtrlDefProfileNameList?
Holds the default list of Multicast Authorization Profile names the CMTS applies to a cable modem that registered without signaling its own profile set. If this list is empty for a given CM, the CMTS falls back to docsMcastAuthCtrlDefAction to decide whether to permit or deny its multicast joins.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.19.1.1.2 snmpwalk -v2c -c public <target> DOCS-MCAST-AUTH-MIB::docsMcastAuthCtrlDefProfileNameList
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.19.1.1.2.1 snmpget -v2c -c public <target> DOCS-MCAST-AUTH-MIB::docsMcastAuthCtrlDefProfileNameList.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4491.2.1.19.1.1.2.1 s <value>
Start monitoring DOCSIS CMTS headend equipment (multicast authorization, vendor-neutral CableLabs standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-MCAST-AUTH-MIB::docsMcastAuthCtrlDefProfileNameList OID value, configure state conditions and alerts, and monitor any DOCSIS CMTS headend equipment (multicast authorization, vendor-neutral CableLabs standard) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4491 | cableLabs | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2 | clabProject | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.1 | clabProjDocsis | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.1.19 | docsMcastAuthMib | CLAB-DEF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4491.2.1.19.1 | docsMcastAuthMibObjects | DOCS-MCAST-AUTH-MIB |
| 1.3.6.1.4.1.4491.2.1.19.1.1 | docsMcastAuthCtrl | DOCS-MCAST-AUTH-MIB |
| 1.3.6.1.4.1.4491.2.1.19.1.1.2 | docsMcastAuthCtrlDefProfileNameList | DOCS-MCAST-AUTH-MIB |